Sony SLV-AV100U Operating Instructions Manual page 79

Note
¢ When SF OFF is selected,
the tone cannot be adjusted. -
To return to the previous menu
Select RETURN instead of pressing MENU in step 5, then press
EXECUTE.
Adjusting the tone for all sound fields
Adjust the tone of the front, center and rear speakers for optimum
sound. You can adjust the tone for all sounds fields, including
PROLOGIC.
1 start playing a program source,
SOUR SET
then repeat steps 1 through 4 in om
. TONE EDIT
"Using the pre-programed sound SUREDIT | LEVEL EFFECT
fields" on page 49 and select one =
. . SELECT : +
of the sound fields in step 3. set: [a], EXECUTE
2 Press CURSOR #/$ to move the
cursor (1) to TONE EDIT.
CENTER MODE
SELECT : [#4
SET : (EXECUTE!
3 Press EXECUTE. Then, press
CURSOR ¢/$ to move the cursor (I) ease
to BASS, and press CURSOR @/=> FLAT
to adjust the level of the low oe
frequencies as you like.
4 press CURSOR t/$ to move the
cursor (1) to TREBLE, then press
CURSOR @/=> to adjust the level
of the high frequencies as you
like.
RETURN
SELECT :
SET
5 Press MENU to return to the
original screen.
To return to the previous menu
Select RETURN instead of pressing MENU in step 5, then press
EXECUTE.
To start your adjustment from a flat equalizer curve
Select FLAT after pressing EXECUTE in step 3 above, then adjust BASS
and TREBLE.
continued
Sound Field Operations 79