Panasonic WJ-FS216 Operating Instructions Manual page 19

C. Single Spot or Quad Playback Picture
Sequences
. Repeat the procedures A (Single Spot Picture) to
monitor a single spot playback picture or the proce-
dures B (Multi Spot Picture) monitor quad playback
pictures.
Note: To monitor quad multi spot pictures, press
the button 1 (G5). Sequential 3x3 and 4x4
playback pictures are not available.
. Press the SEQUENCE/ALARM RESET button for
sequential display of playback pictures.
Note: Sequential pictures appear in the last select-
ed mode.
Sequential single spot pictures are displayed
on a single picture screen, and sequential quad
pictures on a quad screen.
Example of single spot
playback picture sequence
Playback Picture of CH 3
Playback Picture of CH 6
Example of quad
playback picture sequence
Playback Picture | Playback Picture
Playback Picture | Playback Picture
Playback Picture | Piayback Picture
Playback Picture | Playback Picture
3. To cancel sequential picture display, press the
desired camera selection button.
The selected playback picture appears on the sin-
gle picture screen of the monitor.
-17-
D. Still Playback Picture
i Repeat the procedures A (Single Spot Picture) or
the procedures B (Multi Spot Picture} to monitor
playback pictures.
Set the MODE SELECT/CAMERA SELECT switch to
MODE SELECT.
Press button 16 (STILL ON) to light the STILL ON
indicator lights.
e] oe h
STILL ON XX
. Set the MODE SELECT/CAMERA SELECT switch to
CAMERA SELECT.
. Press one of the camera selection buttons whose
indicator is lit.
The LED on the pressed button starts blinking, and
the picture corresponding to that button appears
still on the monitor.
The word STILL appears blinking on the monitor
screen.
Still Picture (The word "STILL" blinks)
Norma! Playback Picture
Still Picture (The word "STILL" blinks)