Panasonic WJ-FS216 Operating Instructions Manual page 12

. TITLE DISPLAY
This parameter lets you decide whether or not to
have the title displayed.
. Move the cursor to the TITLE DISPLAY parameter.
* MENU2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY ON
STILL/ALARM DISP ON
. Select ON or OFF.
ON: Title display
OFF: No title display
The factory setting is ON.
. STILL/ALARM DISP
This parameter lets you decide whether or not to
have the word "STILL" displayed when a picture is
paused by pressing button 16 (STILL ON), or the
word "ALARM" when the unit is received the alarm
signal.
. Move the cursor to the STILL/ALARM DISP parame-
ter.
* MENU2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY ON
STILL/ALARM DISP 'ON
. Select ON or OFF.
ON: "STILL" and "ALARM" are displayed.
OFF: "STILL" and "ALARM" are not displayed.
The factory setting is ON.
-10-
C. Setting up MENU 3 OF 3 in the
MULTIPLEX mode
The content of MENU 3 OF 3 in MULTIPLEX mode
is as shown below.
* MENU3 OF 3 *
BORDER WHITE
AUTO SKIP OFF
SEQUENCE SETUP *
START SCREEN l-SEQ
SYSTEM MODE MULTIPLEX
1. BORDER
This parameter lets you select the color of the bor-
ders that divide the screen.
. Move the cursor to the BORDER parameter.
* MENU3 OF 3 *
BORDER
AUTO SKIP
SEQUENCE SETUP *
START SCREEN 1-SEQ
SYSTEM MODE MULTIPLEX
. Select the color of the borders.
OFF: The borders do not appear.
BLACK: Black borders
GRAY: Gray borders
WHITE: White borders
The factory setting is WHITE.
. AUTO SKIP
This parameter lets you select automatic skipping of
channels to which no camera is connected.
. Move the cursor to the AUTO SKIP parameter.
* MENU3 OF 3 *
BORDER WHITE
AUTO SKIP (OFF;
SEQUENCE SETUP *
START SCREEN 1-SEQ
SYSTEM MODE MULTIPLEX
. Select ON or OFF.
ON: Channels to which no camera is connected are
skipped.
OFF: No channels are skipped.
The factory setting is OFF.