Daikin VRV EMERION RXYQ-AATJA Service Manual page 94

Address Setting for Wireless Remote Controller
5. Press INSPECTION/TEST button for 1 second to return to normal mode.
Multiple Settings A/b
The command such as operation mode or temperature setting by this remote controller will be
rejected when the target indoor unit operation is restricted as by an external control such as
centralized control.
Since the setting acceptance is hard to discriminate with such circumstances there are two setting
options provided to enable discriminating by a beeping sound according to the operation: "A:
Standard" or "b: Multi System". Set the setting according to the customer's intention.
Remote Controller
Multiple setting Display on remote
controller
A: Standard All items displayed.
(factory set)
b: Multi Display only items
System transmitted for a while.
87
Field setting mode
Address
Multiple setting
Indoor Unit
Behavior to the remote controller operation when
the functions are restricted as by an external
control.
Accepts the functions except restricted.
(Sounds one long beep or three short beeps)
There may be a difference from the indoor unit
status with remote controller display.
<When some restricted functions are
included in the transmitted items>
Accepts the functions except restricted.
(Sounds one long beep or three short beeps)
There may be a difference from the indoor unit
status with remote controller display.
<When no restricted function is included>
Accepts all items transmitted
(Sounds two short beeps)
The remote controller display agrees with the
indoor unit status.
SiUS342303E
UP button
DOWN button
FAN button
RESERVE button
FILTER SIGN RESET button
INSPECTION/TEST button
Other than the left
Accepts all items transmitted
(Sounds two short beeps)
The remote controller display agrees
with the indoor unit status.
Part 3 Remote Controller