Würth DWSS Translation Of The Original Operating Instructions page 15

Intended use
The device may only be used for screwing in and
screwing out of screws in wood, metal and plastics.
The device must only be operated using compressed
air. The device is not suitable for use as a lever,
breaking or striking tool. The device is designed for
use with genuine Würth system accessories.
Any other use or use beyond this scope is consid-
ered improper use.
The user is liable for damage in the e ent
of im ro er use
De ice elements
Overview
1 Switch on o
2 Ring (for exhaust air duct)
3 Tool holder
4 Switch (torque and direction of rotation)
5 Locking ring
6 Handle
7 Compressed air connector
8 Hose connector (Würth system accessory)
9 Hose clamp (Würth system accessory)
10 Compressed air hose (Würth system accessory)
Symbols on the de ice
Symbol
g and
Meaning
Read the operating
instructions!
Wear suitable ear protectors!
Wear protective glasses.
Wear a suitable protective
mask!
Technical data
tem
Square tool holder
Idle speed
Maximum torque
Compressed air threaded connector
Average air consumption
Min. hose diameter
Operating pressure (max.)
Weight
Emission alues
Noise level according to ISO 15744
Sound pressure level (no load)
Sound power level (no load)
Measurement uncertainty K
ibration le el according to
ISO 28927-2+A1
Vibration emissions
Measurement uncertainty K
De ice rotection
Risk of injuries or material damage.
The permissible operating pressure
¾
of 6.3 bar must not be exceeded, if
necessary use a pressure reducer.
To avoid damage caused by contaminated com-
pressed air, a compressed air service unit must be
installed in the airline system. Where hose lengths
of longer than 10 m are used, the device must be
equipped with a small air line lubricator because
otherwise the supply of oil is not guaranteed. The
compressed air supply must be adequately sized!
5714 309 0
1/2"
10 000 rpm
610 Nm
1/4"
119 l/min
9 mm
6.3 bar
1.4 kg
97.5 dB(A)
108.5 dB(A)
3.0 dB(A)
8.0 m/s²
1.28 m/s²
CAUTION!
15