D-Link DWM-312 User Manual page 62

Section 4 - Con guration
Select Enable to use the Disconnect command to have the router
Disconnect:
disconnect from the mobile network.
Select Enable to use the Reconnect command to have the router
Reconnect:
cycle the mobile connection o and then back on again.
Select Enable to use the Reboot command to have the router
Reboot:
initiate a reboot.
Noti cation Settings
Select Enable to receive SMS noti cations when the WAN Link is
WAN Link Up:
up. These noti cations will be sent to numbers speci ed in the
access control list.
Select Enable to receive SMS noti cations when the WAN Link is
WAN Link Down:
down.
Access Control Settings
Select Enable to input phone numbers. When enabled, the router
Access Control:
will accept SMS commands only from those phone numbers
which have the Management option selected. Additionally, the
router will send any noti cation messages to any numbers with
the Noti cation option selected.
Note: The access control settings rely on caller-ID information
provided by the phone system, and contain no additional
authentication or encryption tools.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual
Message Settings (Cont)
58