Inbound Filter - D-Link DWM-312 User Manual

Section 4 - Con guration
Inbound Filter enables you to control what packets are allowed to come in to your network from the Internet. The inbound lter only applies to
packets that are destined for Virtual Servers or DMZ hosts.
Select this box to enable the lter.

Inbound Filter:

Select a schedule to use and copy to the speci ed rule ID when
Use Schedule
you click the Copy to button. You may select Always On or use
Rule:
a speci c schedule that you have de ned. To create and edit
schedules, please refer to Schedules on page 41.
INBOUND FILTER RULES LIST
Here, you can select whether to Allow or Deny all incoming tra c
except for tra c that matches the listed rules.
This identi es the rule.
ID:
Specify the local IP address and then specify the port after the
Source IP : Ports:
colon.
Specify the remote IP address and then the port after the colon.
Destination IP :
Ports:
Check the box to enable the speci ed rule.
Enable:
Specify the schedule rule number. Click on the Add New Rule
Schedule Rule #:
button to create a new schedule rule.
Go back to the previous lter page.
Previous Page:
Advance to the next lter page.
Next Page:
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual
Inbound Filter
41