Pptp Client - D-Link DWM-312 User Manual

Section 4 - Con guration
Check Enable to enable the router to act as a PPTP client. If
VPN-PPTP Client:
enabled, the following options will appear:
Indicates the internal ID of the PPTP account for reference in the
ID:
Connection Status table.
Specify a name for the PPTP account for reference in the
Name:
Connection Status table. This name is for reference only and does
not a ect functionality.
Enter the IP address or domain of your VPN server.
Peer IP/Domain:
Enter the user name provided to you by your VPN operator.
User Name:
Enter the password provided to you by your VPN operator.
Password:
Enter the route to which to bind the VPN tunnel.
Route:
Select On Demand, Auto, or Manual.
Connect:
Check the appropriate boxes to support Microsoft Point-to-Point
Option:
Encryption (MPPE) and Network Address Translation (NAT).
Check this box to enable the VPN client.
Enable:
D-Link DWM-312 User Manual

PPTP Client

31