Table of Contents
Advertisement
CONTROL PANEL (CONT'D)
Screen
Note: Important: The decontamination cycle values (time and fan speed) are only valid and functional when using the Autonomous Operation Schedule
function. Otherwise, if a manual decontamination cycle is necessary (see Manual Decontamination Cycle).
24
OPERATIONS MODE – FUNCTIONALITY
Button
Turn on/Off the equipment
Press the (1) power button to cycle fan On/Off.
Changing the speed fan
To change the fan speed, please use the (4) Up or (6) Down
buttons. Note:The equipment needs to be turned on for the
fan speed adjustment to take effect.
Adjust the Date and Time
Press and hold for 5 secs (3) Enter Button. The date display
will start blinking. Use the (4) Up or (6) Down button to
change the date and time. Once you have selected the
desired date, press the (3) Enter Button to move to the
next input eld. Repeat these steps to adjust the time. After
making all the necessary changes, press (5) Return to
con rm the new settings.
Choose particle size to display on main screen
On the main screen, press (5) Return.The display will
change, showing the screen (PM and lter pressure Drop).
Press (2) Function + (4) Up or (6) Down to choose the
desired particle size. The Arrow on the corner of the screen
will indicate the particle size. After you selected the particle
size, return to the main screen to view the results.
Reset the Filter Life timer (After replacing the lter)
On the "PM and Filter Pressure Drop", press and hold for 5
secs (3) Enter button. This will open the "Changing Filters"
screen. Use (4) Up or (6) Down to select "YES" to reset
lters. Press the (3) Enter button to move between Pre- lter
and HEPA lter options. Use the (5) Return button to con rm.
Adjust Room Decontamination cycle
(Period and fan speed)
On the "PM and Filter Pressure Drop", press (5) Return to
move the "Room Decontamination screens". Press and hold
for 5 secs (3) Enter button, the eld will start blinking use
the (4) Up or (6) Down buttons to select the number desired
and (3) Enter button to move on the eld. After making all
the necessary changes, press (5) Return to con rm the new
settings.
Action
Advertisement
Table of Contents
