Planet HDP-1261PT User Manual page 86

Relay2 Mode Monostable: There is only one fixed action status for door unlocking.
Bistable: There are two actions and statuses, door unlocking and door locking.
Each action might be triggered and changed to the other status. After the
change, the status would be kept.
Initial Value is Monostable.
Relay2 Duration Door unlocking time for Monostable mode only. If the time is up, the door would
be locked automatically. Initial Value is 5 seconds.
Relay2Follow mode Independent: Open the door independently with Relay 1.
Synchronous: Open the door at the same time as Relay1.
Asynchronous: Relay1 opens after a period of time Relay2 opens.
Asynchronous delay The user can set the asynchronous door opening delay time of Relay1 and
Relay2, the default is 1 second.
RFID card format Supported access control card format
Wiegand format Supported Wiegand access card format
Wiegand mode Optional input port or output port, default in
Wiegand Type Supports 26 and 34
Enable Card Reader Enable or disable card reader for RFID cards.
Set ID card stats:
Normal: This is the work mode where the slot card can open the door.
Card Reader
Card Issuing: This is the issuing mode where the slot card can add ID cards.
Working Mode
Card Revoking: This is the revoking mode where the slot card can delete ID
cards.
1080p SIP Vandalproof Door Phone with RFID and PoE
86
HDP-1261PT