Related Manuals for Planet HDP-1160PT
Summary of Contents for Planet HDP-1160PT
- Page 1 720p SIP Vandalproof Door Phone with PoE HDP-1160PT 720p SIP Vandalproof Door Phone with PoE HDP-1160PT...
- Page 2 "as is". Should the programs prove defective following their purchase, the buyer (and not PLANET, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software.
- Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User’s Manual of 720p SIP Vandalproof Door Phone with PoE Model: HDP-1160PT Rev: 1.00 (November, 2019) Part No. EM-HDP-1160PT_v1.0...
-
Page 4: Table Of Contents
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Table of Contents Chapter 1. Product Introduction ........................6 Package Contents ........................6 Overview ............................6 Specifications ..........................10 Chapter 2. Hardware Interface ........................12 Physical Descriptions ........................ 12 Hardware Installation ......................... 15 Initial Utility Installation ...................... - Page 5 720p SIP Vandalproof Door Phone with PoE HDP-1160PT 5.3.1 SIP ..........................37 5.3.2 Basic Settings......................41 Intercom Settings ........................42 5.4.1 Features ........................42 5.4.2 Audio .......................... 44 5.4.3 Video .......................... 45 5.4.4 MCAST ........................49 5.4.5 Action URL ......................... 50 5.4.6...
-
Page 6: Chapter 1. Product Introduction
The HDP-1160PT works like an intercom. As its name implies, it is vandalproof and has a video feature. It supports the standard IETF SIP protocol and ONVIF protocol for easy operation and interfaces with the VoIP and IP surveillance world in an instant it connects you with. - Page 7 When the visitors press the call button at your door, you can press the unlock button on your mobile phone or PLANET VTS-700P 7-inch SIP Indoor Touch Screen PoE Video Intercom to open the door for your visitors.
- Page 8 Standard Protocol Compliance The HDP-1160PT supports IETF Session Initiation Protocol 2.0 (RFC 3261) and ONVIF protocol for easy integration with general voice over IP system and video management system. The IP PBX/NVR device is able to broadly interoperate with equipment provided by VoIP/IP surveillance infrastructure providers, thus enabling them to provide their customers with better multimedia exchange services.
- Page 9 720p SIP Vandalproof Door Phone with PoE HDP-1160PT...
-
Page 10: Specifications
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 1.3 Specifications Product HDP-1160PT Video Image Device 2 megapixels with 1/2.7” color CMOS Video Compression H.264 Main stream: 1280 × 720@25fps Resolution Sub stream: 704 × 576(D1)@25fps 112° (H), 84° (V) Viewing Angle Minimum Illumination 0.1lux with infrared illumination... - Page 11 720p SIP Vandalproof Door Phone with PoE HDP-1160PT HTTP/HTTPS web server, HTTPS certificate manager Network and Provisioning Network Interface 1 x 10/100BASE-Tx RJ45 Ethernet interface, auto-MDIX IP Configuration Static/DHCP/PPPoE L2TP / OpenVPN Auto-provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIP PnP/TR-069 Web Management Portal...
-
Page 12: Chapter 2. Hardware Interface
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Chapter 2. Hardware Interface 2.1 Physical Descriptions Product Dimensions (W x D x H) 195 x 120 x 34 mm Net Weight 1015g Front Panel Interface Description Wall-mount Housing IP65 and IK10 outdoor housing for rigorous environment... - Page 13 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Function Key LED State Type State Normally on Successfully registered DSS Key (Speed dial button) Quick flashing Registration failed/network abnormal Slow flashing In call Interface Description Open the rear case of the device, there is a row of terminal blocks for connecting the power supply, electric lock control, etc.
- Page 14 (Please be sure to ground the line, otherwise there will be noise) The HDP-1160PT requires either IEEE 802.3af/at PoE or DC power from the power connector. Power Connector The picture shows the two-pin connector that comes with system power source of 12V DC, 1A (maximum for the two-pin connector).
-
Page 15: Hardware Installation
D. Get the power cord and network cable connected, and secure it tightly with the screws. Wall Mounting Steps of HDP-1160PT While drilling or fixing the HDP-1160PT, hold it tight or else it may drop that may accidentally hurt the installer. -
Page 16: Initial Utility Installation
2.3 Initial Utility Installation There are two methods as shown below to search the HDP-1160P. Method 1: Open the Planet Door Phone Finder Utility. Press the Refresh button to search the HDP-1160PT and find the IP address. Method 2: Press and hold the DSS key for 10 seconds.When the speaker beeps rapidly, press the DSS key again quickly. -
Page 17: Chapter 3. Web-Based Management
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Chapter 3. Web-based Management Please take a few minutes to read through this guide to familiarize with the steps required to set up your door phone. This chapter provides setup details of the door phone Web-based Interface. - Page 18 720p SIP Vandalproof Door Phone with PoE HDP-1160PT in the configurations. The SIP line configuration should be set via the Web configuration page by entering the correct information such as phone number, authentication name/password, SIP server address, server port, etc. which are provided by the SIP server administrator.
-
Page 19: Chapter 4. Basic Function
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Chapter 4. Basic Function 4.1 Making Calls After setting the function key to “Hot Key” and the “Number”, press the function key to immediately call out the set number, as shown below: For more details on configuration, refer to 5.6 Function Key. -
Page 20: Auto-Answering
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 4.4 Auto-Answering The user can turn off the auto-answer function (enabled by default) on the device webpage, and the ring tone will be heard after the shutdown, and the auto-answer will not time out. -
Page 21: Dnd
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Auto-Answering Field Name Description Auto Answer Timeout (0~60) The range can be set to 0~ 60s and the call will be answered automatically when the timeout is set. 4.5 DND Users can turn on the do-not-disturb (DND) feature on the device's web page to reject incoming calls (including call waiting).Do not disturb can be set by the SIP line respectively on/off. -
Page 22: Call Waiting
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 4.6 Call Waiting Web interface: enter [Intercom Settings] >> [Features], enable/disable call waiting, enable/disable call waiting tone. - Page 23 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Call Waiting Field Name Description Enable Call New calls can be accepted during a call. Waiting Disable Call New calls will be automatically rejected and a busy signal will be prompted. Waiting Enable Call When you receive a new call on the line, the device will beep.
-
Page 24: Chapter 5. Advanced Function
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Chapter 5. Advanced Function 5.1 System 5.1.1 Information User can get the system information of the device in this page including, Model Hardware Version Software Version Uptime Last uptime ... -
Page 25: Account
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 5.1.2 Account On this page the user can change the password for the login page. Users with administrator rights can also add or delete users, manage users, and set permissions and passwords for new users. -
Page 26: Configurations
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 5.1.3 Configurations On this page, users with administrator privileges can view, export, or import the phone configuration, or restore the phone to factory settings. Configurations Field Name Description Export Right click to select target save as, that is, to download the device's configuration file, Configurations suffix “.txt”. -
Page 27: Upgrade
Click “Select”, select the version and then click “Upgrade”. 5.1.5 Auto Provision The HDP-1160PT supports SIP PnP, DHCP options, static provision, and TR069. If all of the 4 methods are enabled, the priority from high to low is shown below: PNP>DHCP>TR069> Static Provisioning... - Page 28 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Auto Provision Field Name Description Common Settings It will show the current config file’s version. If the version of configuration downloaded is higher than this, the configuration will be upgraded. If the...
- Page 29 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Auto Provision Field Name Description Server Address Broadcast address. As default, it is 224.0.0.0. Server port PnP port. Transporation Protocol PnP protocol, TCP or UDP. Update Interval PnP message interval. Static Provisioning Server Set FTP/TFTP/HTTP server IP address for auto update.
-
Page 30: Fdms
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 5.1.6 FDMS FDMS Field Name Description Community Name of equipment installation community. Name Building Name of equipment installation building. Number Room Number Equipment installation room name. 5.1.7 Tools This page gives the user the tools to solve the problem. -
Page 31: Network
When enabled, set the syslog software address, and log information of the device will be Syslog recorded in the syslog software during operation. If there is any problem, log information can be analyzed by PLANET technical support. Network It generates a network packet file via start/stop automatically and the file can be Packets analyzed by PLANET technical support. -
Page 32: Basic
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 5.2.1 Basic This page allows users to configure network connection types and parameters. Basic Field Name Description Network Status The current IP address of the equipment. Subnet Mask The current Subnet Mask. -
Page 33: Vpn
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Basic Field Name Description Settings Select the appropriate network mode. The equipment supports three network modes: Network parameters must be entered manually and will not change. All Static IP parameters are provided by the ISP. - Page 34 720p SIP Vandalproof Door Phone with PoE HDP-1160PT becomes part of the server’s network. The network transmission of the device may be routed through the VPN server. For some users, especially enterprise users, a VPN connection might be required to be established before activating a line registration.
-
Page 35: Web Filter
720p SIP Vandalproof Door Phone with PoE HDP-1160PT up every time until user disables it. Sometimes, if the VPN connection does not establish immediately, user may try to reboot the device and check if VPN connection is established after rebooting. - Page 36 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Add and remove IP segments that are accessible; configure the starting IP address within the start IP, end the IP address within the end IP, and click [Add] to submit to take effect. A large network segment can be set, or it can be divided into several network segments to add.
-
Page 37: Line
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 5.3 Line 5.3.1 SIP Configure the service configuration for the wire on this page. - Page 38 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Field Name Description Basic Settings (Choose the SIP line to be configured) Display the current line status at page loading. To get the up to date line Line Status status, user has to refresh the page manually.
- Page 39 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Field Name Description Advanced Settings Enable the device to subscribe a voice message waiting notification; if Subscribe For Voice Message enabled, the device will receive notification from the server if there is voice message waiting on the server.
- Page 40 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Field Name Description In-band RFC2833 SIP_INFO AUTO Different service providers may offer different models When the device's DTMF type is set to SIP_INFO The DTMF_SIP_INFO type is configured to send */#, and when the device DTMF SIP INFO Mode presses the */# key, the actual value sent is */#;...
-
Page 41: Basic Settings
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Field Name Description RTP Encryption Set the pass phrase for RTP encryption. With Mac field When enabled, all SIP messages strip Mac fields. Register with the Mac field When enabled, register the message ribbon Mac field. -
Page 42: Intercom Settings
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Basic Settings Field Name Description SIP Settings Local SIP Port Set the local SIP port used to send/receive SIP messages. Registration Failure Retry Set the retry interval of SIP REGISTRATION when registration failed. - Page 43 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Features Field Name Description Limit Talk If enabled, calls would be forced to end after talking time is up. Duration Talk Duration The call will be ended automatically when time is up. Initial Value is 120 seconds.
-
Page 44: Audio
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Features Field Name Description System Language for configuring voice prompts. Language If this item is selected, the device will reject any incoming calls and the caller will remind Enable DND the device not to use, but the local exhalation will not be affected. -
Page 45: Video
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Audio Field Name Description DTMF Payload Type Setting DTMF payload type, the value range must be 96~127. Configure the default ring tone. If no special ringtone is set for the caller Default Ring Type number, the default ringtone will be used. - Page 46 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Video Field Name Description Camera status: When the device is restarted, the camera status shows whether it is currently available. Camera status and number of The maximum number of accesses, the maximum number of main code...
- Page 47 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Video Field Name Description Video Capture (Local) Auto: IRCUT switches according to the actual ambient light level of the camera. IRCUT Mode Synchronization: The switching of the IRCUT is determined by the actual brightness of the IR lamp.
- Page 48 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Video Field Name Description Video Title Content When enabled, video can see the set title information. Video Encode (Local) Encode Format Only H.264 encoding format is supported. Main stream: support 720P Resolution Sub-stream: D1 (704 * 576) The larger the value is, the more coherent the video would be got;...
-
Page 49: Mcast
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 5.4.4 MCAST This feature allows user to make some kind of broadcast call to people who are in multicast group. User can configure a multicast DSS Key on the phone, which allows user to send a Real-time Transport Protocol (RTP) stream to the pre-configured multicast address without involving SIP signaling. -
Page 50: Action Url
720p SIP Vandalproof Door Phone with PoE HDP-1160PT MCAST Field Name Description Priority the higher priority multicast first. Name Listened multicast server name. Host:port Listened multicast server’s multicast IP address and port. Multicast Configuration Steps: Go to web page of [Function Key] >> [Function Key Settings], select the type to multicast, set the ... -
Page 51: Time/Date
720p SIP Vandalproof Door Phone with PoE HDP-1160PT 5.4.6 Time/Date Users can configure the device's time settings on this page. - Page 52 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Time/Date Field Name Description Network Time Server Settings Time Synchronized via SNTP Enable time-sync through SNTP protocol. Time Synchronized via DHCP Enable time-sync through DHCP protocol. Primary Time Server Set primary time server address.
-
Page 53: Security Settings
720p SIP Vandalproof Door Phone with PoE HDP-1160PT Time/Date Field Name Description Select automatic DST according to the preset rules of DST, or the DST Set Type manually input rules. The DST offset time. Offset The DST start month. Month Start The DST start week. - Page 54 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Security Settings Field Name Description Input Settings Input Detect Enable or disable Input Detect. When choosing the low level trigger (closed trigger), detect the input port (low level) closed trigger. Trigger Mode When choosing the high level trigger (disconnected trigger), detect the input port (high level) disconnected trigger.
-
Page 55: Function Keys
Reset Alerting Status Reset to resume and stop ringtone playback Ring Type Ringtone can be set to none / preset Server Settings Send message to the server when the alarm is triggered. message format：Alarm Info: Description=HDP-1160PT;SIP Server Address User=;Mac=00:30:4f:68:23:d1;IP=172.18.90.235;port=Input1 5.6 Function Keys... - Page 56 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Key Event The speed dial key type could be set as Key Event. Function Key Type Subtype Usage None No responding Release Delete password input, cancel dialing input and end call Key Event...
- Page 57 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Function Key Type Number Line Subtype Usage Using Speed Dial mode together with Speed Dial can define whether this call is Fill the called allowed to be hung up by The SIP account party’s SIP...
- Page 58 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Advanced Settings Advanced Settings Field Name Explanation Input port is multiplexed as Enable or disable the input port to be multiplexed as speed dial button 2 function key 2 Use Function Key to Answer...
-
Page 59: Appendix A: Troubleshootings
Appendix A: If the following fixes cannot troubleshoot your problems, contact the supplier where the purchase is made or PLANET technical support team. Get device system information Users can obtain information through the [System] >> [Information] option on the device webpage. The following information will be provided: Device information (model, software and hardware version), Internet Information, etc. - Page 60 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Problematic Case Solution 2. Please check if the device has an IP address. Check the system information. If the IP address is Negotiating..., the device has not obtained an IP address. Please check if the network configuration is correct.
-
Page 61: Appendix B: How To Use Icf-1800 To Open Door Via Dtmf Code
Appendix B: door via DTMF code Step 1. Install HDP-1160PT x 1 ICF-1800 x 1 and IPX-330 x 1 and anode lock x 1 at the client. Step 2. Register account at HDP-1160PT and ICF-1800 to IPBPBX. Step 3. Set up DSS key of HDP-1160PT and make sure the equipment can dial to ICF-1800 after pressing call button. - Page 62 720p SIP Vandalproof Door Phone with PoE HDP-1160PT Step 6. Open anode lock through remote DTMF of ICF-1800 (The default is 1234).