Intercom Setting >> Media - Planet HDP-1261PT User Manual

5.21 Intercom Setting >> Media
Parameters
Codecs Settings
Media Setting
Default Ring Type
Speakerphone Volume
Speakerphone Ring Volume
Speakerphone Ring Volume
DTMF Payload Type
Opus Playload Type
OPUS Sample Rate
ILBC Payload Type
ILBC Payload Length
Enable VAD
Figure 5-21-1 Media Setting Page Screenshot
Description
Select the enabled and disabled voice codecs
codec:G.711A/U,G.722,G.729,ILBC,opus,G.726,G.723.1
Set the default ring type. If the caller ID of an incoming call
was not configured with specific ring type, the default ring will
be used.
Set the speakerphone volume, the value must be 1~9.
Set the ring volume in the speakerphone, the value must be
1~9.
Set the ring volume in the speakerphone, the value must be
1~9.
Enter the DTMF payload type, the value must be 96~127.
Enter the opus payload type, the value must be 96~127.
Set the opus sample rate including OPUS-NB（8KHz),
OPUS-WB（16KHz）
Set the ILBC Payload Type
Set the ILBC Payload Length
Enable Voice Activity Detection. When enabled, the device
will suppress the audio transmission with artificial comfort
64
1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1261PT