Planet HDP-1261PT User Manual page 83

Triggered by DTMF
Ring tone
Triggered by URI
Ringtone
Triggered By SMS
Ringtone
Triggered By Dsskey
Ringtone
Output Response
Standard Status
Output Duration
Input trigger
Triggered by DTMF
DTMF Trigger Code
DTMF Reset Code
Reset By
Triggered by URI
Trigger Message
Rest Message
Triggered by SMS
Trigger SMS
Reset SMS
Triggered by Input
Select the DTMF trigger ringtone.
Select the URI trigger ringtone.
Select the SMS trigger ringtone.
Select the Dsskey trigger ringtone.
Enable or disable Output Response
When selecting the low-level trigger (NO: normally open), meeting the
trigger condition will result in the disconnection of the NO port.
When opting for the high-level trigger (NC: normally closed), meeting the
trigger condition will cause the closure of the NC port.
Set the output change duration time, the default is 5 seconds.
When the input port meets the trigger condition, the output port will trigger
(the port level time changes, controlled by <output duration>).
Enable or disable trigger by DTMF. The device will check the received
DTMF sent by remote device. If it matches the DTMF trigger code, the
device will trigger corresponding output port.
Input the DTMF trigger code, default value is 1234.
Input the DTMF reset code, default value is 4321.
Reset the output port mode by duration or state.
By duration: Reset the output port status when output duration occurs.
By state: Reset the output port status when device's call state changes.
Enable or disable trigger by URI.
User can send commands from remote device or server to i16SV series
device. If the command is correct, then device will trigger corresponding
output port.
Input trigger message for trigger in URI mode.
Input reset message for trigger in URI mode.
Enable or disable trigger by SMS.
User can send ALERT command to i16SV series device. If the command is
correct, then device will trigger corresponding output port.
Input trigger message for trigger in SMS mode.
Input reset message for trigger in SMS mode.
Select the input port. When the input port meets the trigger condition, the
output port will be triggered (The Port level time change, By < Output
1080p SIP Vandalproof Door Phone with RFID and PoE
83
HDP-1261PT