Security Settings - Planet HDP-1261PT User Manual

5.37 Security Settings

Tamper protection is enabled. Upon activation, if the device is forcibly removed, an alarm message will be
sent to the server, and an alarm ring will be played.
Security Settings
Parameters
Basic Settings
Ringtone Duration
Input & Tamper Server
Address
Information
Input settings
Input
Triggered by
Input Duration
Triggered Action
Triggered Ringtone
Output Settings
Enable Logs
Figure 5-37-1 Security Setting Page Screenshot
Description
Set the ringtone duration, default value is 2 seconds.
Set remote server address. The device will send message to the server
when the alarm is triggered. The message format is:
Alarm_Info:Description=HDP-1261PT;SIP
User=;Mac=00:30:4f:xx:xx:xx;IP=; port=Input .
Fill in the information attached to the upload server
Enable or disable Input
When choosing the low level trigger (closed trigger), detect the input port
(low level) closed trigger.
When choosing the high level trigger (disconnect trigger), detect the input
port (high level) disconnected trigger.
Set the Input change duration time, the default is 5 seconds.
Send SMS: Set the alert message to be sent to server if selected.
Event: The device will perform corresponding Dss Key configurations if any
key is selected; by default the value is none.
Triggered Ringtone: Select triggered ring tone.
Ringtone selection
Enable or disable LOG
1080p SIP Vandalproof Door Phone with RFID and PoE
82
HDP-1261PT