Planet HDP-1261PT User Manual page 63

Magnetic door
detection beep
Intercom Settings
Enable Intercom
Enable Intercom
Mute
Enable Intercom
Tone
Enable Intercom
Barge
Response Code Settings
Busy Response
Code
Reject Response
Code
Users can set a custom tone in the system settings under "Upgrade"
and "Ringtone." After upgrading the ringtone file, the custom tone
can be applied to the settings for card deletion failure.
Closed: No beep will occur after detecting an anomaly in the door
magnetic detection.
Default: Use the default beep
Voice: The default built-in voice prompt is set to "Please close the
door."
Customized door detection tones can be configured in the system
settings under "Upgrade" and "Ringtones." After upgrading the
ringtone file, the custom tones can be applied to the settings for
door detection.
When intercom is enabled, the device will accept the incoming call
request with a SIP header of Alert-Info instruction to automatically
answer the call after specific delay.
Enable mute mode during the intercom call.
If the incoming call is intercom call, the phone will play the intercom
tone.
Enable Intercom Barge by selecting it; the phone will auto answers
the intercom call during a call. If the current call is intercom call, the
phone will reject the second intercom call.
Specify the SIP response code for a busy line.
Configure the SIP response code for call rejection.
63
1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1261PT