Planet HDP-1261PT User Manual page 84

Triggered by Call state
Triggered by DssKey
Triggered Hangup
Hangup Delay
Motion detection settings
Motion Detection
Alarm
Trigger Duration
Trigger ringtone
Trigger behavior:
Send SMS
Function key
Tamper Alarm Settings
Enable Tamper Alarm
Alarm command
Reset command
Alarm Ringtone
Detachable alarm reset
Reset alarm state
Duration > control).
Select call state to trigger the output port. Options are:
Talking: When the device's talking status changes, trigger the output port.
Ringing: When the device's ringing status changes, trigger the output port.
Calling: When the device's calling status changes, trigger the output port.
Enable or disable trigger by dsskey. If any of the dsskey is selected and
when the dsskey application performs, the output port will be triggered.
Trigger the output port after hanging up.
Hang up trigger delay, default 5 seconds
Enable or disable motion detection
Set the trigger delay time, the default is 3 seconds, the range: 0~3600
seconds
Support ringtone selection
Enable or disable the input port to send messages to the server
When setting to dsskey1 or dsskey2, and triggering dsskey to make a call,
the default is none
Whether to enable tamper detection. If the terminal is violently dismantled,
the tamper will be triggered and will always play the set alarm ringtone.
When someone is detected for tampering the equipment, the alarm signal
will be sent to the corresponding server.
When the equipment receives the command of reset from server, the
equipment will stop alarm.
Alarm ringtone setting
Reset the play of stop ringtone
1080p SIP Vandalproof Door Phone with RFID and PoE
84
HDP-1261PT