Saving Programs - Waldorf IRIDIUM CORE Quick Start Manual

Hide thumbs Also See for IRIDIUM CORE:

Table of Contents

Getting Started

Tap on the desired parameter in the touchscreen and

move your finger to change a parameter value.

Of course, you will find a comprehensive explanation

of all functions, parameters and numerous sound

design tips in the full manual.

Saving Programs

After you have finished editing a sound program you must

save it if you intend to use it again. All of Iridium Core's

memory locations are available for this purpose.

To save a sound program:

Press the Save button to acti-

vate the Save Preset page. The

Save button is lit red.

Edit the Name (if desired).

Use the Prev/Next button or the Selection dial

to select the desired sound program number,

where the sound is saved to.

Finally, tap on Save on the touchscreen to store

the sound program at the selected location.

By tapping on Cancel in the touchscreen or

pressing any button on the front panel, you can

discard the storing process at any time.

Whenever you save a program, the selected memory

location is overwritten. Therefore, any previously

stored program at this location will be erased and

there is no way to get it back.

Want to start with a clean initialized sound?

Enter the Load page and tap on the Init button to

initialize the current loaded sound. No sound pro-

gram is overwritten during this action.

Iridium Core Quickstart

Table of Contents