Sumake DT-6617 Manual

DT-6617
Features:
Reinforced Zinc & TPR body
Ideal for Automotive Industrial & Trade
Spiral Protected Air Hose
Heavy Duty Zinc Die Cast Body
Operation pressure up to 100 PSI
Fast inflation, air flow delivered: 1.15 CFM
Function:
Fill air (inflation)
Release air (deflating)
Gauge pressure(measuring)
Specifications:
 Large LCD Display for Easy Reading
Pressure Range: PSI; Bar; kg/cm2; Kpa

Pressure Increments: 0.5PSI / 0.05Bar/0.05kg/cm² / 5 Kpa

 Automatic shut off after 60 seconds of to conserve battery life
Measuring Range form 0-160 PSI (＋/－2%,@25 )

Supply Voltage: 1.5V <CR2032 battery>

Spiral Protected Air Hose 39cm & Clip Tip <360 Degree swivel function>

 Dual Chuck 9-1/2"
Check tire pressure often while inflation. Inflate to tire manufacturer's recommended pressure only.
Over-inflation and under-inflation of fire both create potentially hazardous driving conditions.
Wearing impact-resistant protective eyewear while inflation tires is recommended.
To read Pressure Depress Lever Fully Release
Never Connect to an Air Source that is Capable of Exceeding 150 PSI.
Always check and set pressure when the tire is cold.
Ideal System Connection
3 IN 1 DIGITAL TIRE INFLATOR
℃