YABER Pro U9 - Projector Manual

YABER LIFETIME PROFESSIONAL SUPPORT

Please read this manual thoroughly before using the projector. If you have any issues, email your order number and the problem to aftersales@yabertech.com. We will provide a fast solution in 24 hours.

Actually, many problems can be easily solved by setting, such as no signal, no sound, bluetooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We promise all the projectors have been 100% carefully checked and packaged before shipping.

If you have any questions, could you please contact us so that the problem can been solved. And give us an opportunity to improve. We guarantee we will provide you a satisfactory solution

Thanks for your understanding!
YABER Service Team

TIPS

1. Do not place projector in too warm or too cold room, because the high temperature or low temperature will shorten lifespan of the device. The working environment would be 5°C-35°C better.
2. If there are black spots on the projection screen, please don't worry, please contact aftersales@yabertech.com via email, we can send you a video about how to remove the dust.
3. The ventilation is equipped for the projector to work stably. Don't cover the vent with cloth, blanket or other things. Don't insert anything into the slit of the projector, or it may produce a short circuit or an electric shock to your device and cause damage.
4. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
5. Lens, as the core component of the projector is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.

PACKAGE LIST

PRODUCT SPECIFICATIONS

PRODUCT OVERVIEW

1. Power Key
2. Menu
3. OK Key
4. Arrow Key
5. Source
6. Back

Tips: Pro U9 fuselage buttons are touch-screen buttons, which can be operated with a light touch.

REMOTE CONTROL

1		Turn on/off the power
2		Make system settings
3	M	Can make some basic adjustrnents of the screen after clicking during the video playback
4		Operate in AV or HDMI mode
5		Volume down
6		Play or pause the video in USB mode
7		Close the sound
8	S	Select the input signal source
9		Used adjust the parameter of the projector in the menu mode
10		Back to the main
11		Return to tho previous menu
12		Volume up

Note:

1. Install 2 pieces of AAA batteries into the remote controller before using it. Do not combine new batteries with old ones in remote controller, which can cause operation failure due to insufficient power supply.
2. When using the remote controller, please make sure that the signal transmitter of the remote controller aims at infrared signal receiver of the projector.
3. If you are not using the remote controller for an extended period, please take out batteries to prevent batteries leakage.

INSTALLATION

Installation Method

The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with following methods:

Keep the projector at a height where its lens is axial symmetry to the screen, If this is not possible, use the keystone correction function to adjust the projection image,
If you want to get a free projection screen, please contact us via aftersales@yabertech.com

The recommended projection distance is about 10.8ft, the shortest projection distance is 4.0ft.

The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances,

Install on the Ceiling

1. Please purchase an universal projector ceiling mount;
2. Remove the four rubber pads on the bottom of the projector, you will see the screw holes and use the M4*10 mm screws for installing the ceiling, and then install it.
   

STARTING THE UNIT

1. Press the power key on the remote or projector, the indicator light will tum blue;
2. Adjust the focus ring of the projector to get the best image performance;
   (If it is still blurry, please try to adjust the projection distance.)
3. Use the 4D keystone function of the projector to get a rectangle projection screen;
4. Connect the external device (Smart phone, iPad, Fire TV stick, TV box, DVD player, Computer, etc.) in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal.
5. Select the " " menu, enter the [Settings], then you can select the option [Language Setting] to set your preferred language.

PS: Enter the [Setting] menu- then you can select the option [Language] to set the preferred language.

IMAGE ADJUSTMENT

When using the projector for the first time, it normally displays an unclear image. This is due to the lens being out of focus or the incorrect trapezoid setting.
Please follow the below steps to correct:

Focus Adjustment

Image adjustment

Please follow the below steps to correct:
Adjust the image size to get the best image size by moving the projector back and forth, then rotate the lens to get the best focus. use the keystone ring or 4D&4P keystone function (4 Comer keystone & 4 Side) keystone Of the projector to get a rectangle projection screen.

Select the Signal Source

Press the "S" button on the remote control or the projector and choose between: "AV", "HDMI1", "HDMI2" Connect the external device (Smart phone, iPad, Fire TV stick, TV box, DVD player, Computer, etc.) in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal. And you can see the homepage "Video" "Music" "Picture" "Signal Source""iOS Cast""Miracast"

SETTING UP THE DEVICE

The projector's home page is as follow

Select The Input Signal Source

Select the desired input signal source (HDMI1/HDMI2/AV) on the home-page

USB Disk Input Mode

Play Video/Music/Picture/Office in the USB Disk Input Mode

1. Insert the USB Disk, Select the option [Video/Music/Picture/Office]
2. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [OK] button to play it.

TIPS:

1. Pro U9 upgraded projector supports U disk to directly play PPT, Word, Excel files;
2. lf you enter from the [Video] menu, you can only play the video. The same as other 3 option.

Video Interface

Menu	Function
	Switch to the previous video
	Fast Backward, rewinds the video back quickly while playing it. The rewinding speed ranges from 2X to 32X
	Play or pause the current video
	Fast Forward, pushes the video to move forward quickly while playing it. The forward speed ranges from 2X to 32X
	Switch to the next video
Player Menu		Include	Function
Subtitle options		Subtitle On-Off, subtitle Switching, Subtitle advanced	Set multiple modes of video subtitles
Audio options		Track Switch	You can set the audio mode
Advanced options		Forward rewind	You can set the Video to fast forward or rewind
Screen Scale		Default. Full-Screen Playback, 16:9 Playback, 4:3 Playback	You can set the video aspect ratio
Speed		0.25-2	Video playback multiple

Music Play Interface

1. Press the " " button on the remote control. You can directly open the music list and play directly
2. Press the " " button on the remote control. You can set the music play mode, single loop/random play, etc.

Office Play Interface

Choose the file you want to open, press the "OK" button on the remote controller or projector. When you open PPT file, you can select two play modes: play, auto play.

WiFi Setting

Wireless Connection

Warming Tips:

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended,
3. Some mobile devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to email YABER via aftersales@yabertech.com

iOS Cast (for iOS Devices)

1. Go to home page — Select the [ ] menu Select the [WiFi] menu — Open the WiFi function — Select your home WiFi from the list — Connect the U9 projector to your home WiFi.
   
2. Back to home page Select [iOS Cast] menu — Press the OK button to enter the [iOS Cast] menu.
   
3. Select the [Settings] menu on your iOS device — Turn on the [ Wi-Fi ] function — Connect your iOS device to the same home network as the projector.
4. Open the [Control Center] on your iOS device — Select the [Screen Mirroring] function — Select and connect the iOS Cast receiver named [BU_XXXXX] — your iOS device screen will be displayed on the projection screen after 3 seconds.

Miracast (for Android Devices)

1. Go to home page — Select the [Miracast] menu — Press the OK button to enter the [Miracast] interface.
   
2. SeIect the [Settings] menu on your Android device — Select the [Screen mirroring] function — Select your Miracast receiver named [Android_XXXX] — your Android device screen will be displayed on the projection screen after 3 seconds.
   
3. On your Android device, tap [Settings] -[WLAN Display] - Turn [Wi-Fi] ON, Connect your home WiFi.
   

Note:

1. Different brands of Android phones have different operations for select Screen Mirroring Display, please refer to your phone' s manual. [Multiscreen/Wireless display/WLAN display/Screen mirroring/Wireless projection/Smart view etc.]
2. Not all Android phones support this function. Please make sure it is supported before use.

Bluetooth Setting

1. Go to home page — Select the [ ] — Select the [Bluetooth].
2. Open the Bluetooth function and your Bluetooth device.
3. Click "Search for the Bluetooth devices".
4. Choose the Bluetooth device desired and press OK, wait a few seconds fora successful Bluetooth connection.

Note:

1. The Pro U9 projector is compatible with the Bluetooth headsets, Bluetooth speakers and Airpods, but not the Bluetooth keyboards or Bluetooth phones,
2. When connecting a Bluetooth speaker, Need to disconnect from the previously connected device or turn off the previous Bluetooth device, make sure the speaker is waiting for pairing, Otherwise the projector cannot search for Bluetooth or cannot connect to Bluetooth speakers.
3. If you have any question, please feel free to email YABER via aftersales@yabertech.com

Image Setting

Select " " menu on the projector's home page

Keystone Setting

4-corner Keystone: 0-50

When the projection screen is not rectangular, it can be adjusted by 4-point keystone correction.

1. Press the button to select the [4-corner Keystone] menu, then press the [ OK ] bottom to enter the submenu.
   
2. Press the OK button on the remote controller or projector to select the point.
3. Press the arrow keys on the remote controller or projector to adjust the horizontal or vertical parameters, until the projection screen becomes the desired rectangle,

4-side Keystone: -40—40

1. Press the button to select the [4-side Keystone] menu, then press the [OK] bottom to enter the submenu,
   
2. If the projection image shows as (1), press the button on the remote controller or projector to increase the vertical parameter (-40—0), until to achieve the projection image (2).
   
3. If the projection image shows as (3), then press the button on the remote controller or projector, and decrease the vertical parameter (0—40), until to achieve the projection image (4).
   

Reset

Click the "reset", the parameters will be restored to default values.

Unit Position

You can set 4 projection modes here:

1. Front-Ceiling
2. Rear-Ceiling
3. Front
4. Rear

Custom zoom

1. Press the button to select the [Customer zoom] menu, then press the [OK] bottom to enter the submenu.
2. Tum on "Custom zoom", click the "Scaling", tum on the Scaling function, you can reduce the height and width of projection size up to 50% in the same proportion.
3. Click the "Scaling", turn off the Scaling, you can reduce the horizontal ZOOM and Vertical zoom of projection size up to 50% apartly.

System update

Factory Reset

Language

SIGNAL LINES CONNECTION

YABER Pro U9 projector has 6 interfaces, HDMI ports*2/USB ports*2/AV in/Audio output. Please select the correct connecting port to connect your device (PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)

Connect USB Disk

1. Insert the USB Disk, Select the option [Video/Music/Picture/Offce];
2. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [OK] button to play it.

Connect the Devices via the HDMI ports

1. Connect your TV stick or laptop to any HDMI port of the projector;
2. Enter the home page to select the corresponding HDMI as the signal source.

Connect to the DVD Player

Use the 3-in-1 AV cable in the package

1. Turn on your DVD player and the projector;
2. Connect the colorful female connectors to your DVD player's RCA cable with the 3-in-1 AV cable in the package;
   
3. Connect the black connector to the AV port of the projector, enter the home page to select [AV] as the signal source,

Or connect to the DVD Player with the HDMI cable in the package.

Connect to the Sound bar/Speaker

If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and your speaker as the picture shows.

SAFE SHUTDOWN

1. Press the button " " on the projector or remote controller. There will be three options, restart, shut down, scheduled shut down. You can choose different shutdown modes.
   
2. Unplug the power cord of the projector,
3. Cover the lens and store the projector in a cool and dry place.

TROUBLESHOOTING

Problems listed below might occur during the operation of your projector. Please refer to the possible factors which might cause the issue to do troubleshooting.

1. When turning on the power switch. the indicator light does not work.
   1. The power might not be connected well
   2. Check the over-heat protection system.
2. The remote controller does not communicate with the projector.
   1. The power switch at the back of the projector is turned on or off?
   2. The remote controller's batteries are depleted?
   3. Something obstructing the signal between the remote and IR
   4. Strong light on IR directly.
3. No image on the screen
   1. Is the channel set-up correct?
   2. Is there an input signal?
   3. Is the input cable plugged well?
   4. Under PC mode, is the refresh rate > 75KHz?
4. Blue screen, no picture, no sound.
   Input cables connected right?
5. Picture right, no sound.
   1. Input cables connected right?
   2. Volume at min or on Mute.
6. Can't play the movies.
   1. The format of the video is right?
   2. Files are broken?
   3. Device is broken?
7. There is picture, no sound?
   The decode system doesn't match
8. Can't find devices when connected with hard drive or flash drive.
   Check if the device is broken,
9. Auto-off after working for a while.
   1. The projector ventilation is blocked.
   2. The voltage is not stable.
   3. The over-heat protection system.

www.yabertech.com
Yaber entertainment projector
aftersales@yabertech.com
@Yaber.official

Documents / Resources

References

• Yaber Entertainment Projector

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download YABER Pro U9 - Projector Manual