YABER Pro U10 - Projector Manual
YABER Lifetime Professional Support
Dear customer,
Thank you very much for supporting YABER!
Please read this manual thoroughly before using the projector. If you have any Issues, email your order number and the problem to aftersales@yabertech.com. We Will provide a fast solution in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound, bluetooth connection failed, WiFi connection failed, dark spots, choppy animation etc. We promise all the projectors have been 100% carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem can been solved. And give us an opportunity to improve. We guarantee we will provide you a satisfactory solution.
Thanks for your understanding!
YABER Service Team
TIPS:
- DO not place projector in too warm or too cold room, because the high temperature or low temperature will shorten lifespan of the device. The working environment would be 5°C~35°C better.
- If there are black spots on the projection screen, please don't worry, please contact aftersales@yabertech.com via email, we can send you a video about how to remove the dust.
- The ventilation is equipped for the projector to work stably. Don't cover the vent with cloth, blanket or other things. Don't insert anything into the slit of the projector, or it may produce a short circuit or an electric shock to your device and cause damage.
- The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
- Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.
PACKAGE LIST
- Pro U10 Projector *1
- Remote Control *1
- Power Cord *1
- HDMI Cable *1
- 3-in-1 AV Cable
- Lens Cover *1
- Cleaning Cloth *1
- User Manual *1
- Cleaning kit *1
PROJECTOR SPECIFICATIONS
Model Pro U10 |
Native Resolution | 1920*1080P |
Display Technology | LCD |
Color Gamut | 16.7M Full |
Recommended Projection Distance | 6ft-9ft |
Power Voltage | AC100-240V |
Picture File | JPG/JPEG/BMP/PNG |
Keystone Correction | Manual Vertical & Horizontal |
Light Source | LED |
Aspect Ratio | 4:3/16:9 |
Minimum Projection Distance | 4.5ft |
Projector Weight | 4.8lb |
Interfaces | HDMI*2/USB*2/3.5mm Headphone jack/AV/VGA |
Projection Method | Front/Rear on Desk, Front/Rear on Ceiling |
Video File | AVI/.MP4/.MKV/.FLV/.MOV/.3GP/.MPEG1/MPEG2 |
Audio File | MP3/APE/AAC/FLAC/OGG/MID/M4A |
PROJECTOR OVERVIEW
1 | Yaber logo | Yaber Nameplate |
2 | Project lens | Optical coated glass lens |
3 | Power indicator | When the power is connected, the projector power indicator lights up red |
4 | Power Cord Port | Power Cord Port |
5 | IR window | Infrared signal receiver |
6 | USB Port | USB port1/USB port2 |
7 | AV port | Audio input |
8 | HDMI Ports | HDMI 1 input / HOMI 2 input |
9 | Audio output | 3.5mm audio output jack |
10 | VGA input connector | VGA input connector |
11 | Air Outlet | Prevent the projector from overheating |
12 | Air Inlet | Circulate inside and outside air |
13 | Rubber Pads | Protective pads/remove to install ceiling mount |
14 | Dust cleaning port | When black spots and dust appear on the screen, open the Port to clean the dust |
1 | Power | Turn on/off the power |
2 | Back | Return to the previous menu |
3 | OK | Confirm the option |
4 | Arrow Keys | Used to adjust the parameter of the projector in the menu mode |
5 | Source | Enter the signal source selection interface |
6 | Menu | Enter the menu interface |
REMOTE CONTROL
- Power
- Source
- Arrow keys
- Menu
- Homepage
- Volume +
- Volume -
- Mute
- Picture flip
- Confirmation key
(Play and Pause) - Back
- Previous
- Next
1 | | Turn on/off the power |
2 | | Select the input signal source |
3 | | Used to adjust the parameter of the projector in the menu mode |
4 | | Operate in HDMI or AV mode |
5 | | Enter the home page |
6 | | Volume up |
7 | | Volume down |
8 | | Close the sound |
9 | | Picture flips |
10 | | Confirm the option/Play or pause the video |
11 | | Return to the previous menu |
12 | | Switch to the previous video |
13 | | Switch to the next video |
Note:
- Install 2 pieces of AAA batteries into the remote controller before using it. Do not combine new batteries with old ones in remote controller, which can cause operation failure due to insufficient power supply.
- When using the remote controller, please make sure that the signal transmitter of the remote controller aims at infrared signal receiver of the projector.
- lf you are not using the remote controller for an extended period, please take out batteries to prevent batteries leakage.
INSTALLATION
Installation Method
The projector can be hanged on the ceiling with special hanger frame, and placed on the stable desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with following methods:
- Front projection Ceiling mount
- Rear projection Ceiling mount
- Front projection Table mount
- Rear projection Table mount
Keep the projector at a height where its lens is axial symmetry to the screen. If this is not possible, use the keystone correction function to adjust the projection image.
If you want to get a free projection screen, please contact us via aftersales@yabertech.oom.
Projection Distance and Size
Aspect Ratio: 16:9 |
Distance (ft.) | Screen Size |
56 | 45" |
71 | 58" |
10.9 | 90" |
12.9 | 106" |
16.4 | 138" |
The recommended projection distance is about 7.1ft, the shortest projection distance is 4.5ft.
The image sile depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.
Install on the Ceiling
- Please purchase an universal projector ceiling mount;
- Remove the four rubber pads on the bottom of the projector, you will see the screw holes and use the M4 screws for installing the ceiling, and then install it.
STARTING PROJECTOR
- Press the power key on the remote or projector, the indicator light will turn Green;
- Adjust the focus ring on the left side of the projector to get the best image performance; (If it is still blurry, please try to adjust the projection distance.)
- Use the 4D keystone function of the projector to get a rectangle projection screen;
- Connect the external device (Smart phone, iPad, Fire tv stick, TV box, DVD player, Computer, etc.) in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal;
- Select the "" menu, then you can select the option [ Language ] to set your preferred language.
IMAGE ADJUSTMENT
When using the projector for the first timet it normally displays an unclear image. This is due to the lens being out Of focus or the incorrect trapezoid setting.
Please follow the below steps to correct:
- Focus Adjustment
Rotate the focus ring or lens slowly. At the same time, check the focus point carefully. The best focus point for the lens would be where the image most clear.
Note: If it is still blurry, please try to adjust the projection distance. - Digital 4D Keystone Correction
Use the digital 4D keystone correction of the projector to change the image to be rectangle (vertical and horizontal).
SETTING UP THE PROJECTOR
The projector's home page is as follow.
Select the desired input signal source (HDMI1/HDMI2/VGA/AV) on the homepage.
- Input the USB Disk;
- Select the option [ Video/Music/Pictures/Offce Suite ] on the homepage and enter;
- Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [ OK ] button to play it.
Play Interface
Menu | Function |
| Select play mode (single cycle/directory loop) |
| Switch to the previous video |
| Fast Backward rewinds the video back quickly while playing it. The rewinding speed ranges from 2X to 32X |
| Play or pause the current video |
| Fast Forward, pushes the video to move forward quickly while playing it. The forward speed ranges from 2X to 32X |
| Switch to the next video |
| Select all playlists in the current folder |
| TV Setting |
Menu | Content | Mode | Function |
Picture Mode | User/Standard/Vivid/Soft | Brightness | Modify the picture parameters in the range 0-100 |
Contrast |
Saturation |
Hue |
Sharpness |
Sound Mode | Standard/Sports/News/Music/Movie/Sport/User | 120Hz | Modify the sound parameters in the range 0-100 |
500Hz |
1.5KHz |
5KHz |
10KHz |
Office Suite Play Interface
By pressing the button on the remote controller to enter the menus.
(Note: the Office version may be automatically updated, then the updated functions may change. Due to copyright, some functions are temporarily unavailable. Please refer to the actual version.)
Menu | Content | Function |
| Invalid key, please ignore. | / |
| Invalid key, please ignore. | / |
| Export to PDF | Export to PDF |
Protect | / |
Start slide show | From the current slide |
Advance slides | / |
Cast Presentation | / |
Go to Slide | Quickly select the desired page |
Zoom | Fit/Fit width/Actual size |
Properties | View the properties of file |
Help | Help instructions |
WiFi Setting
Wireless Connection
Warming Tips:
- The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
- Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
- Some mobile devices may not support screen mirroring due to the compatibility.
- Any questions, please feel free to email YABER via aftersales@yabertech.com.
iOS Cast (for iOS Devices)
- Go to home page — Select the [] menu — Select the [ WiFi Setting ] menu — Open the WiFi function — Select your home WiFi from the list — Connect the Pro U10 projector to your home WiFi.
- Back to home page — Select [ iOS Cast ] menu — Press the OK button to enter the [ iOS Cast] menu.
- Select the [ Settings ] menu on your iOS device — Turn on the [ Wi-Fi ] function — Connect your iOS device to the same home network as the projector.
- Open the [ Control Center ] on your iOS device — Select the [ Screen Mirroring ] function — Select and connect the iOS Cast receiver named [ U10-iOS-Cast-XXXX ] your iOS device screen will be displayed on the projection screen after 3 seconds.
Miracast (for Android Devices)
- Go to home page — Select the [ Miracast ] menu — Press the OK button to enter the [ Miracast Setting ] Menu.
- Select the [ Settings ] menu on your Android device — Select the [ Screen mirroring ] function — Select your Miracast receiver named [ U10-An-Cast-XXXX ] — your Android device screen will be displayed on the projection screen after 3 seconds.
- On your Android device, tap [ Settings ] -[ WLAN Display ] -Turn [ Wi-Fi ] ON, Connect your home WiFi.
Note:
- Different brands of Android phones have different operations for select Screen Mirroring Display, please refer to your phone's manual. [ Multiscreen/Wireless display/WLAN display/Screen mirroring/Wireless projection/Smart view etc. ]
- Not all Android phones support this function. Please make sure it is supported before use.
Bluetooth Setting
Go to home page → Select the [] menu → Select the [ Bluetooth ] Option → Open the Bluetooth function and your Bluetooth device → Scan the Bluetooth devices nearby automatically → Choose the Bluetooth device desired → it will be paired and connected automatically.
Note:
- The Pro U10 projector is compatible with the Bluetooth headsets, Bluetooth speakers and Airpods, but not the Bluetooth keyboards or Bluetooth phones.
- If you have any question, please feel free to email YABER via: aftersales@yabertech.com.
Projector Image Setting
Projector Mode
Go to home page → Select the [ Projector Mode ] Option → then select the four projection Direction you like.
- Front projection Ceiling mount
- Rear projection Ceiling mount
- Front projection Table mount
- Rear projection Table mount
Four Point Keystone Correction
When the Projection screen is not rectangular, it can be adjusted by 4-ponit keystone correction.
- Go to home page -- Select the[] -- Select the [Keystone Correction] Menu;
- Press the button to select the[ 4-Point Keystone ] menu, then Press the [ OK ] button to enter the submenu.
:
Keep pressing the OK button on the remote control or projector, until the positioning icon appears at the point desired.
:
Press the arrow keys on the remote control or projector to adjust the horizontal or vertical parameters.
:
Press the key on the remote controller to back to previous page.
:
Long press the MENU button on the remote to restore the original parameters.
Digital Zoom
- Go to home page — Select the[] menu — Select the [Keystone Correction] Menu.
- Press the button to select the[ Digital Zoom ] menu, then Press the[OK] button to enter the submenu.
- By pressing the button on the remote or projector, you can reduce the height and width of projection size up to 50%.
System Update
Local Update
- Contact Yaber to get the latest file update (aftersales@yabertech.com), download the software.
- Copy the software<update.zip> to the root directory of the U disk, then insert the U disk into the projector and turn on the power switch. After booting up, go to settings, system upgrades, select the U disk storing update.zip, click to confirm the upgrade, it will automatically enter the upgrade, and it will automatically restart after the upgrade is completed.
Online Update
Select the [Online Update], if there's a new version that can be updated, please click [UPGRADE] in the lower right corner to confirm the upgrade.
Notice:
- If there is no UPGRADE button, it means that the current version is the latest and there is no upgradeable version.
- Please do not return to other pages or shut down during the upgrade process.
Other Settings
Menu | Function |
About the System | Detailed information about the system |
Boot Settings | Select Drive or Extended Drive |
Factory Restore | Restore user operation application configuration and system setting |
Date
- Go to home page -- Select the[] menu -- Select the [Date] Menu, then Press the[OK] button to enter the submenu.
- By pressing the button on the remote or projector, you can adjust the time and date.
About the System
Menu | Content |
System Version | U10:20XXXXXX |
SIGNAL LINES CONNECTION
YABER Pro U10 projector has 7 interfaces, HDMI ports*2/USB ports*2/ 3.5mm headphone output/ AV output/ VGA interface*1. Please select the correct connecting port to connect your device (PC, Phone, DVD Player Soundbar, USB, PS4 etc.)
- Connect USB Disk
- Insert the U disk into either of the two usb input ports;
- You can directly enter the start-up screen on the home page, select the option [ Video/Music/Pictures/Offce Suite]
- Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [ OK ] button to play it.
- Connect the Devices via the HDMI ports
- Connect your TV stick or laptop to any HDMI port of the projector;
- Enter the home page to select the corresponding HDMI1 or HDM12 as the signal source.
- Connect to the DVD Player
Use the 3-in-1 AV cable in the package - Tum on your DVD player and the projector;
- Connect the colorful female connectors to your DVD player's RCA cable with the 3-in-1 AV cable in the package;
- Connect the black connector to the AV port of the projector; enter the home page to select [AV ] as the signal source.
Or connect to the DVD Player with the HDMI cable in the package.
- Connect to the Sound bar/Speaker
If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and your speaker as the picture shows, enter the home page to select [AV ] as the signal source.
SAFE SHUTDOWN
- Press the button on the projector or remote controller.
- Unplug the power cord of the projector.
- Cover the lens and store the projector in a cool and dry place.
TROUBLESHOOTING
Problems listed below might occur during the operation of your projector. Please refer to the possible factors which might cause the issue to do troubleshooting.
- When turning on the power switch, the indicator light does not work.
- The power might not be connected well.
- Check the over-heat protection system.
- The remote controller does not communicate with the projector.
- The power switch at the back of the projector is turned on or off?
- The remote controller's batteries are depleted?
- Something obstructing the signal between the remote and IR
- Strong light on IR directly.
- No image on the screen.
- Is the channel set-up correct?
- Is there an input signal?
- Is the input cable plugged well?
- Under PC mode, is the refresh rate > 75KHz?
- Blue screen, no picture, no sound.
Input cables connected right? - Picture right, no sound.
- Input cables connected right?
- Volume at min or on Mute.
- Can't play the movies.
- The format of the video is right?
- Files are broken?
- Device is broken?
- There is picture, no sound?
The decode system doesn't match. - Can't find devices when connected with hard drive or flash drive.
Check if the device is broken. - Auto-off after working for a while.
- The projector ventilation is blocked.
- The voltage is not stable.
- The over-heat protection system.
www.yabertech.com
aftersales@yabertech.com
Yaber entertainment projector
@Yaber.official
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download YABER Pro U10 - Projector Manual
Need Assistance?
Do you have a question about the U10 that isn't answered in the manual? Leave your question here.