Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ShowPro Venue Haze 1200
Summary of Contents for ShowPro Venue Haze 1200
- Page 1 Venue Haze 1200 User Manual...
- Page 2 3. Product description Venue Haze 1200 is a haze machine with a large output, which can quickly produce a lot of thin smoke to float in the air. It adopts a remote controller, which can adjust the smoke output. It can also be controlled using a DMX console.
- Page 3 5. Safety instructions • Do not touch the device during operation as the housing heats up. • Keep this device away from rain and moisture. • Unplug the mains lead before opening the housing. • Damage caused by disregarding the guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
- Page 4 7. Operation instructions • Place the machine flat in a dry and stable position, check and confirm that the appearance and accessories of the machine are undamaged, and check that the power cord is in good condition without damage or extrusion deformation.
- Page 5 8. Product Diagram 1.Safety eyelet 9.DMX-socket 17.Filter 10.Wire controller connector 2.Handle 18.Tank 11.Power supply 3.Nozzle 19.Interval(1-30s) 4.Vent 12.Bracket 20.Duration(1-20s) 13.Washer 5.Fixation Screw 21.Output adjustment 14.Fixation Screw 6.Adjustable angle 22.Manual 7.Bracket 15.Tube 23.Duration 16.Tank cap 8.Control Board 24.Timer 9. Maintenance • Please use our high-quality haze fluid to extend the life of the machine.
- Page 6 10. Product Warranty Instructions Proof of purchase must be presented when the product requires warranty service. The warranty instructions are as follows. Warranty period: Free maintenance within one year (from the date of purchase) This product will not be considered in warranty under the following circumstances: •...
- Page 7 12. D-800 Timing Controller (Optional): To use the controller, please connect the 5pin plug at the end of the wired controller to the machine. There are three rotary knobs and Timer, Continuous and Manual buttons on the controller, which allow the operator to set and adjust the timer, interval and output.
Need help?
Do you have a question about the Venue Haze 1200 and is the answer not in the manual?
Questions and answers