Summary of Contents for ShowPro Silver Star LED PixPAR 2 Plus 60w
Page 1
LED PixPAR 2 Plus 60w LEDPAR208 USER MANUAL...
Page 2
PRODUCT 1.1 TECHNICAL SPECIFICATIONS Type LED PixPAR 2 Plus 60w RGBW 60w LED Power Voltage Range AC100~240V,50/60Hz Beam Angle 4.5°-45° Protection IP65 -20℃~45℃ Operation Temperature Dimensions 346x242x176mm Weight 5.4kg DIMENSIONS...
Page 3
1.2 Safety Notes IMPORTANT This product must be installed by a qualified professional. • • In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes •...
2 INSTALLATION 2.1 MOUNTING UPRIGHT • For overhead use, always installa safety cable that can hold at least 10 times the weight of the fixture. • For overhead installation, the fixture must be always secured with a safety wire that can bear at least 10 times the weight of the fixture;Secure the fixture with a safety cable through the rear safety eye as shown.
Page 5
2.3 Data network requirements • Connect the DMX512 controller to the units in series. A DMX 512 data link is required in order to control the fixture via DMX. The fixture has 3/5-pin XLR connectors for DMX data input and output. •...
3 FUNCTIONS AND SETTINGS 3.1 DISPLAY OPERATION MENU:Used to access the menu or to return a previous menu option; ◆ ENTER:Used to select and store the current menu or confirm the current function ◆ value or option within a menu; UP:Navigates downwards through the menu list and increasesthe numeric value ◆...
Page 7
4000Hz 6000Hz 25000Hz Locks display (passcode is UP, DOWN, DISP KEY ON (Default) UP, DOWN, ENTER) DISP Display backlight always on TIME Turns off display backlight after 10s/30s /2min of inactivity 2min INFO FIXTURE HOURS Hours of fixture use VERSION Software versions 0x388Axxxxxxxxx Check fixture’s ID...
Need help?
Do you have a question about the Silver Star LED PixPAR 2 Plus 60w and is the answer not in the manual?
Questions and answers