Safety Label Definitions - Wallenstein BXTR5224 Operator's Manual

Safety Labels

3.2 Safety Label Definitions

1. Warning!
Machine damage and possible
entanglement hazard
Oversize material will overload the
machine, which can stall the engine or
cause machine damage. Trying to force
material into the machine can result in
serious injury from a fall or entanglement.
Reverse the roller feed and carefully
remove oversize material from the
machine.
Do not place material that is larger than
in diameter into the chipper
5" (13 cm)
hopper. Never try to force material into
the machine.
2. Warning!
Cut hazard
Sharp rotating parts can cut or sever
fingers, hands, toes, or feet.
Keep hands and feet out of the chipper
hopper or discharge chute when the
machine is on and not in a safe condition.
3. Warning!
Entanglement and crush hazards
Rotating parts can pull you in and cause
serious injury or death.
Do not put any part of your body into the
chipper hopper when the machine is on
or not in a safe condition. Keep hands,
feet, long hair, and loose clothing away
from the chipper hopper.
4. Warning!
Wear the necessary PPE
• A hard hat.
• Heavy gloves.
• Hearing protection.
• Protective footwear with steel toes
and slip resistant soles.
• Protective goggles or a face shield.
5. Caution!
Impact, cut, and puncture hazards
The machine expels wood chips fast
enough to cause personal injury and
property damage.
Stay away from the area around the
discharge chute and never point the
discharge chute at people, animals, or
structures.
6. Warning!
Entanglement, pinch, and crush hazards
Rotating parts can pull in, pinch, and
crush fingers and hands. Install the guard
when work is complete.
Keep your hands away from the drive
belt. Turn off the machine and put it
in a safe condition before service or
maintenance. Wear heavy gloves and use
caution when working in this area.
16
BXTR5224
Wood Chipper