Safety Label Definitions - Wallenstein BXT4224 Operator's Manual

Safety Labels

3.2 Safety Label Definitions

1. CAUTION!
Cut hazard
Sharp rotating parts can cut or sever
fingers, hands, toes, or feet.
Keep hands and feet out of the chipper
hopper or discharge chute when the
machine is on and not in a safe condition.
2. WARNING!
Read the Operator's Manual
There is important safety information and
instructions in the Operator's Manual.
Read all the safety information and
instructions in the Operator's Manual.
Know what all the safety labels mean.
3. CAUTION!
Impact, cut, and puncture hazards
The machine expels wood chips fast
enough to cause personal injury and
property damage.
Stay away from the area around the
discharge chute and never point the
discharge chute at people, animals, or
structures.
4. WARNING!
Entanglement, pinch, and crush hazards
Rotating parts can pull in, pinch, and
crush fingers and hands. Install the guard
when work is complete.
Keep your hands away from the drive
belt. Turn off the machine and put it
in a safe condition before service or
maintenance. Wear heavy gloves and use
caution when working in this area.
5. CAUTION!
Entanglement, pinch, and crush hazards
Keep hands away from this area. Do not
put your hands inside the guard.
Never operate the machine with a guard
removed. Make sure that all of the guards
and shields are installed and the covers
are closed before you start the machine.
Rotating parts that can entangle, pinch,
or crush fingers and hands are exposed
when the guard is removed.
6. WARNING!
Explosion hazard
Smoking, flames, sparks, or other
sources of ignition can cause an
explosion. An explosion can cause
serious injury or death from projectiles,
extreme heat, chemicals, and loud noise.
Do not smoke when you add fuel to the
tank.
16
BXT Series
Wood Chipper