Safety; Safety Alert Symbol; Signal Words; Why Safety Is Important - Wallenstein BXR Series Operator's Manual

BX52R, BX72R, BX102R
3 PH Roller-feed Chipper

2. Safety

2.1 Safety Alert Symbol

This Safety Alert Symbol means:
ATTENTION! BE ALERT!
YOUR SAFETY IS INVOLVED!
The Safety Alert Symbol identifies important safety messages
on the Wallenstein Wood Chipper and in the manual.
When you see this symbol, be alert to the possibility of
personal injury or death. Follow the instructions in the safety
message.

2.2 Signal Words

The signal words DANGER, WARNING and CAUTION determine
the seriousness level of the warning messages in this manual.
The appropriate signal word for each message in this manual
has been selected using the following guidelines:
DANGER –
Indicates an imminently hazardous situation that, if not avoided,
will result in death or serious injury. This signal word is to be
limited to the most extreme situations typically for machine
components which, for functional purposes, cannot be guarded.
WARNING –
Indicates a potentially hazardous situation that, if not avoided,
could result in death or serious injury, and includes hazards that
are exposed when guards are removed. It may also be used to
alert against unsafe practices.
CAUTION –
Indicates a potentially hazardous situation that, if not avoided,
may result in minor or moderate injury. It may also be used to
alert against unsafe practices.
IMPORTANT – To avoid confusing equipment protection with
personal safety messages, a signal word IMPORTANT indicates
a situation that if not avoided, could result in damage to the
machine.

2.3 Why Safety is Important

Three Big Reasons:
• Accidents Disable and Kill
• Accidents Cost
• Accidents Can Be Avoided
YOU are responsible for the SAFE operation and maintenance of
your Wallenstein product. YOU must make sure that anyone who
is going to use, maintain or work around the machine is familiar
with the operating and maintenance procedures and related
SAFETY information contained in this manual. This manual
alerts you to all good safety practices that should be used while
using your Wallenstein equipment.
YOU are the key to safety. Good safety practices not only protect
you but also the people around you. Make these practices a
working part of your safety program. Be certain that EVERYONE
using this equipment is familiar with the recommended
operating and maintenance procedures and follows all the safety
precautions.
Do not risk injury or death by ignoring good safety practices.
7
Safety