Safety Label Definitions - Wallenstein BXC34 Operator's Manual

Safety Labels

3.3 Safety Label Definitions

1. Caution!
Read the Operator's Manual
There is important safety information
and instructions in the Operator's
Manual.
Read all the safety information and
instructions in the Operator's Manual.
Know what all the safety labels mean.
2. Caution!
Wear the necessary PPE
For example:
• A hard hat.
• Heavy gloves.
• Hearing protection.
• Protective footwear with steel toes
and slip resistant soles.
• Protective goggles or a face
shield.
3. Warning!
Cut hazard
Sharp rotating parts can cut or sever
fingers, hands, toes, or feet.
Keep hands and feet out of the chipper
hopper or discharge chute when
the machine is on and not in a safe
condition.
4. Warning!
Entanglement, pinch, and crush
hazards
Keep hands away from this area. Do
not put your hands inside the guard.
Do not operate the machine with a
guard removed. Make sure that all of
the guards and shields are installed and
the covers are closed before you start
the machine.
Rotating parts that can entangle, pinch,
or crush fingers and hands are exposed
when the guard is removed.
5. Warning!
Entanglement, pinch, and crush
hazards
Rotating parts can pull in, pinch, and
crush fingers and hands. Install the
guard when work is complete.
Keep your hands away from the drive
belt. Turn off the machine and put it
in a safe condition before service or
maintenance. Wear heavy gloves and
use caution when working in this area.
6. Caution!
Machine damage and possible
entanglement hazard
Oversize material will overload the
machine, which can stall the engine
or cause machine damage. If you try
to force material into the machine, it
can result in serious injury from a fall
or entanglement. Carefully remove
oversize material from the machine.
Do not put material that is larger than
3" (8 cm) in diameter into the chipper
hopper. Do not try to force material into
the machine.
16
BXC34
Wood Chipper