Safety Label Definitions - Wallenstein BXT36S Operator's Manual

Safety Labels

3.3 Safety Label Definitions

1. Warning!
Cut hazard
Sharp rotating parts can cut or sever
fingers, hands, toes, or feet.
Keep hands and feet out of the chipper
hopper or discharge chute when the
machine is on and not in a safe condition.
2. Warning!
Impact, cut, and puncture hazards
The machine releases wood chips fast
enough to cause personal injury and
property damage.
Stay away from the discharge chute and
the area where the discharge chute is
pointed. Do not point the discharge chute
at people, animals, or structures.
3. Warning!
Risk of cancer and
reproductive harm
The machine materials
contain chemicals or
machine operation can
produce gases or dust that
are identified by the state
of California as causes of
cancer, birth defects, or
other reproductive harm.
This warning is a
requirement of the state of
California, USA to comply
with Proposition 65: the Safe
Drinking Water and Toxic
Enforcement Act of 1986.
4. Caution!
Wear the necessary PPE
For example:
• A hard hat.
• Heavy gloves.
• Hearing protection.
• Protective footwear with steel toes
and slip resistant soles.
• Protective goggles or a face shield
5. Warning!
Machine damage and possible
entanglement hazard
Oversize material will overload the
machine, which can stall the engine or
cause machine damage. If you try to
force material into the machine, it can
result in serious injury from a fall or
entanglement. Carefully remove oversize
material from the machine.
Do not put material that is larger than
3.5" (9 cm) in diameter into the chipper
hopper. Do not try to force material into
the machine.
6. Caution!
Read the Operator's Manual
There is important safety information and
instructions in the Operator's Manual.
Read all the safety information and
instructions in the Operator's Manual.
Know what all the safety labels mean.
16
BXT36S
Wood Chipper