Transport; Assembly; Check Scope Of Delivery; Requirements For The Place Of Installation - HOLZMANN MASCHINEN HOB260MINI-230V Operating Manual

A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!

TRANSPORT

Transport the machine in its packaging to the place of installation. To manoeuvre the machine in
the packaging, a pallet truck or forklift truck with the appropriate lifting force can be used, for
example. The specifications can be found in the chapter Technical data. For proper transport, also
observe the instructions and information on the transport packaging regarding centre of gravity,
lifting points, weight, means of transport to be used as well as the prescribed transport position
etc. Ensure that the selected lifting equipment (crane, forklift, pallet truck, load sling, etc.) is in
perfect condition. Ensure the correct body posture when lifting, carrying and setting down the
load.
Lifting / Setting down
When lifting/setting down, ensure that you are standing firmly (legs hip-width apart).
Lift/set down load with knees bent and back straight.
Do not lift/set down load with a jerk.
Carrying
Carry load with both hands as close to body as possible.
Carry load with straight back.
When transporting the assembled machine, ensure to lift it only by the machine body and not
by the attachments.
If you transport the machine with a vehicle, ensure that the load is secured appropriately!
NOTE: Do not transport the machine at the work tables, these are not designed to withstand the
tensile load of the machine weight.
After assembly, transport the machine tilting the machine at the transport handles.

ASSEMBLY

14.1

Check scope of delivery

Always note visible transport damages on the delivery note and check the machine immediately
after unpacking for transport damage or missing or damaged parts. Report any damage to the
machine or missing parts immediately to your retailer or freight forwarder.
14.2

Requirements for the place of installation

Choose a suitable place for the machine. Pay attention to the safety requirements and the
dimensions of the machine. The selected location must ensure a suitable connection to the power
supply as well as the possibility of connection to an extraction system. Make sure that the floor can
support the load of the machine. The machine must be levelled simultaneously at all support
points. It is also necessary to guarantee a distance of at least 0.8 m around the machine. In front of
and behind the machine, the necessary distance must be provided for the feeding of long
workpieces.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
C AU TI O N
N O TE
TRANSPORT
29
HOB260MINI_230V