Table of Contents
Advertisement
Basic operations
1. Display the menu.
The OPERATION menu is displayed when you press the MENU switch.
2. Select the menu page.
Turn the MENU control with the "?" mark displayed before the page number (in the page selection
mode), display the desired page, and press the MENU control.
3. Select the item.
Turn the MENU control with the "→" mark displayed in the setting item of the selected page (in the
item selection mode), move the "→" mark to the item to be changed, and press the MENU control.
4. Change the setting value.
Turn the MENU control with the "?" mark displayed in a setting value (in the setting value change
mode) and change the setting value.
For a setting value consisting of numeric characters, the numeric value increases when you turn the
MENU control clockwise (2). It decreases when you turn the MENU control counterclockwise (3).
The numeric value much changes when you rapidly turn the MENU control. It can be fine-adjusted
when you slowly turn the MENU control.
5. Determine the setting value.
Press the MENU control.
The setting value is determined, and the current state is returned to the item selection mode.
n
When you press the MENU switch before pressing the MENU control, the setting value is returned to
the value before change and the current state is returned to the item selection mode.
6. Exit the menu display.
The screen is returned to the item selection mode, page selection mode, and then TOP menu
ever you press the MENU switch. After that, the menu display disappears when you press the MENU
switch.
7. Return the setting value to the factory-setting value.
Press the MENU control for two seconds or more with the "?" mark displayed in the setting value to
be returned to the factory setting (in the setting value change mode).
*: The operation above is applied to only the operation from a TOP menu. Refer to "3-2. TOP Menu".
3-2
*
when-
HDVF-EL70/HDVF-EL75
Advertisement
Table of Contents
