1-5-4. VR-366 Board
1. Remove the PR-337 board. (Refer to Section
1-5-2.)
2. Remove the OLED panel. (Refer to Section
1-7.)
3. Remove the three volume knobs.
4. Disconnect the harness from the connector on
the VR-366 board.
5. Remove the three screws and remove the
VR-366 board.
6. Install the removed parts by reversing the
steps of removal.
1-10
B3
5
VR-366 board
Volume knobs
Harness
HDVF-EL70/HDVF-EL75