Table of Contents
Advertisement
1-8-2. Harness (VF Connection 2)
(HDVF-EL75)
1. Perform steps 1 to 16 in "1-8-1. Harness (VF
Connection 1)" to pull the harness (VF Con-
nection 2) out of the hole in the arm (L) sub
assembly.
2. Remove the eight screws to detach the VF
holder base cover (P).
3. Detach the base guard (P).
4. Remove the screw (B3 x 5).
5. Remove the screw (B2.6 x 3).
6. Detach the 20P CN cover.
7. Remove the two screws (K2 x 4) and discon-
nect the harness (VF CONNECTION 2) from
the VF CN plate.
8. Pull the harness (VF CONNECTION 2) out
of the hole in the VF holder.
9. Install the removed parts by reversing the
steps of removal.
1-22
Base guard (P)
VF holder
base cover (P)
B3 x 5
B3 x 5
Harness
(VF CONNECTION 2)
B2.6 x 3
B3 x 5
K2 x 4
VF CN plate
K2 x 4
20P CN cover
HDVF-EL70/HDVF-EL75
Advertisement
Table of Contents
