Changing The Ip Address - IDS NXT malibu Technical Manual

IDS NXT malibu: Technical Manual
zeroconf
In an IPv4 network with no DHCP server, the camera in DHCP mode uses the Zeroconf method to
independently acquire a valid IP address from the reserved link-local address range. You can use the IDS NXT
cockpit to assign a different IP address to the camera. You can then to log on to the camera and set the
network parameters.
Static IP address
After logging in to the camera, you can assign a static IP address in the IDS NXT cockpit , see Network
configuration in IDS NXT cockpit.

6.4 Changing the IP address

If the IP address of the camera is not set correctly, the camera is displayed in the Finder with an exclamation
mark. Change the IP address of the camera in the IDS NXT cockpit.
Fig. 16: Incorrect IP address
1. Select the camera to change the IP address.
2. Click "Change IP address".
2023-10-25 29