Table of Contents
Advertisement
an outlet with an unreasonable number of other
devices. Be especially careful when using
extension cords—the total power used by all
devices you have connected to the extension
cord's outlet must never exceed the power rating
(watts/amperes) for the extension cord. Excessive
loads can cause the insulation on the cord to heat
up and eventually melt through.
Do not force the unit's power-supply cord to share SO
Before using the unit in a foreign country, consult
with your retailer, the nearest Roland Service
J
Center, or an authorized Roland distributor, as
listed on the "Information" page.
Z\ CAUTION
position does not interfere with its proper venti-
The unit should be located so that its location or
(
lation.
cord when plugging into, or unplugging from an
wy
Always grasp only the plug on the power-supply
Q
outlet.
Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be
placed so they are out of the reach of children.
If the unit could become a hazard if it moves, all
caster wheels should be removed once the unit has
been placed at the place of installation, or has been
loaded onto a vehicle.
Never climb on top of, nor place heavy objects on
the unit.
~)
Never handle the power cord or its plug with wet
q
hands when plugging into, or unplugging from,
)
an outlet.
Before moving the unit, disconnect the power
plug from the outlet, and pull out all cords from
=
external devices.
Before cleaning the unit, turn off the power and
unplug the power cord from the outlet.
ie
Whenever you suspect the possibility of lightning
in your area, pull the plug on the power cord out
_
of the outlet.
Advertisement
Table of Contents
