Table of Contents
Advertisement
Part Names and Functions
Give priority in determining the effects status
(on/off) to the foot switches:
LATCH
The foot switches are given priority in determining the
current effects status (on or off), regardless of the effect on/
off status stored in memory.
The effects now cannot be turned on and off from the VGA-5.
PCS-31
(optional)
TIP
RING
(white)
f (red)
Reverb
Chorus
Delay
Delay
EFX
On/Off
On/Off
On/Off
Tap
On/Off
In this case, you can check the effects' on/off status with the
FS-5L's indicators.
* Connect BOSS FS-5L foot switches (optional). However, when
using the Tap function, connect a BOSS FS-5U (optional) to
DELAY TAP (RING).
* When a single foot switch is connected with one cable to the
DELAY jack, the switch is used for switching the delay on and
off
The foot switch
in this case turns
the delay on and off.
22
@ Using Foot Switches to Switch
Memories
PROGRAM
You can switch between Manual and Memory modes, as well
as switch memory
numbers.
Fil: my:
aha
ee) (ell)
al
Cie}
(ith
it
Memory
Memory
Switches
Number
Number
Manual/Memory
UP
DOWN
* Connect only BOSS FS-5U foot switches (optional).
Notes Regarding Foot Switches
* Connecting a foot switch while the power is on may switch
effects on or off, switch memories, or cause the VGA-5 to
switch between Manual and Memory modes.
* When using the FS-5U or FS-5L foot switches (optional), set
the polarity switch as shown below.
Polarity Switch
6 MIDI
MIDILIN Connector
With a foot controller (such as the optional GFC-50 or FC-
200) connected, you can use your foot to switch memories (p.
24).
Advertisement
Table of Contents
