Ricoh IM 7000 User Manual page 132

2023/05/01 14:47
For details about auto logout from Web Image Monitor, see Web Image Monitor Help.
The User lockout function is enabled on all users only when Basic authentication is specified. Under
Windows authentication and LDAP authentication, only the supervisor and administrators are protected by
User lockout. The policy of the certification server is applied to the other users.
Specifying User Lockout
Specify the number of login password attempts to permit before locking out the user and the period of
time until the lockout is released automatically on Web Image Monitor.
Log in to the machine as the machine administrator from Web Image
Monitor.
Logging in to the Machine as the Administrator
Click [Configuration] on the [Device Management] menu.
Click [User Lockout Policy] in the "Security" category.
Specify the number of login password attempts to permit before locking
out the user and the period of time until the lockout is automatically
released.
Lockout
Select [Active], and then specify "Number of Attempts before Lockout" from 1 to 10.
Lockout Release Timer
Select [Active] to cancel lockout after a specified time elapses, and then enter the desired value in
"Lock Out User for" up to 9999 minutes (about seven days).
Click [OK].
https://support.ricoh.com/services/device/ccmanual/IM_7000-8000-9000-re/en-GB/security/int/policy.htm
Specifying the Policy on Login/Logout | User Guide | IM 7000, IM 8000, IM 9000
2/5