Viewing People Counting Diagram - Dahua IPC-HFW2431T-ZS-S2 Operation Manual

Parameter
Sensitivity
Max Height
Min Height
Step 5 Set arming periods and alarm linkage actions. For details, see "5.1.1 Alarm Linkage".
Click Save.
Step 6
To view alarm information on the Alarm tab, subscribe relevant alarm event. For details,
see "5.1.2 Subscribing Alarm".
Results
You can view the queuing result on the Live page.
The queuing number and the stranding time of each target are displayed on the page.

5.12.4 Viewing People Counting Diagram

You can search and export the heat map and tracking map according to the set searching criteria.
This function is available on some fisheye cameras.
Description
Set the alarm-triggered sensitivity. The higher the sensitivity is, the
easier the alarm will be triggered.
Set the maximum height of the people in detection area. The unit
is cm, and the range is 0–300.
Set the minimum height of the people in detection area. The unit
is cm, and the range is 0–200.
Figure 5-69 Queuing result
195
Operation Manual