Dahua IPC-HFW2431T-ZS-S2 Operation Manual page 108

Select the Enable check box, and enter IP address and port number.
Step 2
Parameter
Multicast Address
Port
Step 3 Click Save.
Results
In the Live page, select RTSP in Multicast, and then you can view the video image with multicast
protocol.
4.6.10 802.1x
Cameras can connect to LAN after passing 802.1x authentication.
Procedure
Step 1 Select Setting > Network > 802.1x.
Step 2 Select the Enable check box, and then configure parameters.
Parameter
Authentication
Figure 4-85 Multicast
Table 4-28 Description of multicast parameters
Description
The multicast IP address of Main Stream /Sub Stream is 224.1.2.4
by default, and the range is 224.0.0.0–239.255.255.255.
The multicast port of corresponding stream: Main Stream : 40000;
Sub Stream1: 40016; Sub Stream2: 40032, and all the range is
1025–65500.
Figure 4-86 802.1x
Table 4-29 Description of 802.1x parameters
Description
PEAP (protected EAP protocol).
97
Operation Manual