Table of Contents
Advertisement
Installation Guide
WS configurator tool
18
WS 403 Remote Solution
The first step is to define the communication between the PC and the CAN adapter and the remote
communication unit.
In the WS Configurator main window, select
•
Options > Settings > Communication Settings.
The Communication Settings window opens.
This window has two different view modes: Standard or Expert view mode.
For the initial configuration, it is essential to ensure the following settings in the expert view mode.
To switch to expert view mode, select View
•
Mode > Expert
L1419125 • Rev BC • January 2015
Advertisement
Table of Contents
Need help?
Do you have a question about the WS 403 and is the answer not in the manual?