Ws Information; Device Information; Ws Unit - Danfoss WS 403 Installation Manual

Hide thumbs Also See for WS 403:

Table of Contents

Installation Guide

WS information

WS 403 Remote Solution

This chapter gives an overview of the device elements and functions and also describes the intended use.

Refer to the Technical Information document for the lists of available device variants and the product

certifications.

See WS 403 Remote Solution Technical Information - L1426375

The device elements WS 403 is showed in the figure below:

1. 'Power/CAN connector'

2. GSM/3G connector

3. GPS connector

4. Mounting holes

5. Aluminum enclosure

6. GPS LED

7. GSM/3G LED

8. ON LED

9. CAN LED

10. Front label

11. Enclosure screws

12. Type label

The Danfoss Telematics WS unit is a GSM/GPRS/UMTS modem, with or without GPS and integrated CAN

gateway for direct connection to a control system. Machine data is either transferred to the programming

or diagnostic system of the machine manufacturer or is buffered on a server.

L1419125 • Rev BC • January 2015

Table of Contents

Do you have a question about the WS 403 and is the answer not in the manual?