Advertisement
Safety Guidelines
Warnings
WARNING: Changes or modifications not expressly approved by Wilson Electronics
will void the user's authority to operate the equipment.
WARNING: E911 location information may not be provided or may be inaccurate for
calls served BY USING THIS DEVICE.
To uphold compliance with network protection standards, all active cellular devices
must maintain at least 6 feet of separation distance from Panel and Dome antennas.
Use only the power supply provided in this package. Use of a non-Wilson Electronics
product may damage your equipment.
RF Safety Warning: Any antenna used with this device must be located at least
10.4 inches from all persons.
WARNING. This is NOT a CONSUMER device. It is designed for installation by
FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE
or express consent of an FCC Licensee to operate this device. Unauthorized
use may result in significant forfeiture penalties, including penalties in excess of
$100,000 for each continuing violation.
WARNING. This is NOT a CONSUMER device. It is designed for installation by
an installer approved by an ISED licensee. You MUST have an ISED LICENCE or
the express consent of an ISED licensee to operate this device.
AVERTISSEMENT: Ce n'est PAS un appareil CONSOMMATEUR. Il est conçu
pour être installé par un installateur agréé par un licencié ISED. Vous DEVEZ
détenir une LICENCE ISED ou le consentement exprès d'un titulaire de licence
ISDE pour utiliser cet appareil.
FOR MORE INFORMATION ON REQUIREMENTS SET OUT IN ISED CPC-2-1-05,
SEE BELOW:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html
10
INDUSTRIAL-CLASS IN-BUILDING, CELL SIGNAL AMPLIFIER
PRO 140i
Advertisement
