Advertisement
Safety Guidelines
Warnings
WARNING: Changes or modifications not expressly approved by Wilson Electronics will void the
user's authority to operate the equipment.
WARNING: E911 location information may not be provided or may be inaccurate for calls served BY
USING THIS DEVICE.
To uphold compliance with network protection standards, all active cellular devices must maintain at
least 6 feet of separation distance from Panel and Dome antennas.
Use only the power supply provided in this package. Use of a non-Wilson Electronics product may
damage your equipment.
RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.
WARNING. This is NOT a CONSUMER device. Is is designed for installation by
FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE
or express consent of an FCC Licensee to operate this device. Unauthorized
use may result in significant forfeiture penalties, including penalties in excess of
$100,000 for each continuing violation.
WARNING: This is NOT a CONSUMER device. It is designed for installation by an
installer approved by an ISED licensee. You MUST have an ISED LICENCE or the
express consent of an ISED licensee to operate this device.
AVERTISSEMENT: Ce n'est PAS un appareil CONSOMMATEUR. Il est conçu pour être
installé par un installateur agréé par un licencié ISED. Vous DEVEZ détenir une
LICENCE ISED ou le consentement exprès d'un titulaire de licence ISDE pour utiliser cet
appareil.
FOR MORE INFORMATION ON REQUIREMENTS SET OUT IN ISED CPC-2-1-05,
SEE BELOW:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html
PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
11
Advertisement
