Install The Power Supplies - HP 8200 zl Installation And Getting Started Manual

Installing the HP 8200 zl Switches
Installation Procedures
AT T E N T I O N
ll y a danger d'explosion s'il y a remplacement incorrect de la batterie.
Remplacer uniquement avec une batterie du même type ou d'un type
équivalent recommandé par le constructeur.
Mettre au rebut les batteries usagées conformément aux instructions du
fabricant.
AT T E N T I O N
If this product contains a real-time clock battery or coin cell battery it may
contain perchlorate and may require special handling when recycled or
disposed of in California and other certain states.
Perchlorate material - special handling may apply see:
www.dtsc.ca.gov/hazardouswaste/perchlorate
information.

4. Install the Power Supplies

Both the 8212 zl switch and the 8206 zl switch can use any of these HP switch
zl power supplies:
■
■
■
C a u t i o n
The J8712A and J8713A power supplies can be paired within the same switch
or within the Power Supply Shelf. However, the J9306A power supply can only
be paired with another J9306A power supply within the same switch or within
the Power Supply Shelf. The J9306A power supply cannot be used with either
the J8712A or J8713A power supplies.
The HP 8212 zl switch has limited operation on a single power supply. Only
the first six module slots (A-F) will be powered when using only one power
supply. In order to power all 12 module slots, the 8212 zl switch requires two
2-14
The J9306A, 1500W PoE+ zl Power Supply, which delivers the following
PoE+:
• up to 300 watts at 110-127 volts
• up to 900 watts at 200-240 volts
The J8712A, 875 W Power Supply, which delivers up to 273 watts of PoE
power.
The J8713A, 1500 W Power Supply, which delivers up to 900 watts of PoE
power at 220 volts.
Web site for more