Mounting General Guidelines - Honeywell Vuquest 3320g User Manual

Mounting Specifications
The 3320 has three M3 x 0.5mm threaded inserts (5.0mm maximum depth) on the bottom of the scanner for mounting with
screws. Do not exceed 3cm-kg torque.

Mounting General Guidelines

• Avoid specular reflections, caused by ambient and internal light sources.
• The bar code should be slightly off perpendicular to the axis of the scanner.
• To reduce specular reflections the skew angle can vary significantly depending on the application such as: ambient
illumination sources, code size and code type.
• Excessive angles should be avoided.
• Other factors, such as surface qualities, mounting distances, secondary windows and external illumination can easily impact
these recommendations.
• If a secondary window is used, the window should be mounted as close to the front of scanner as possible at a 90° angle to
the optical axis to avoid specular reflections.
• For secondary windows, Honeywell recommends the following:
• Optical quality glass
• >95% transmission in the nominal 650nm wavelength
• Anti-reflective coating on both sides
• Avoid window thickness above 2mm
• A skew angle of 15° to 20° between the normal of the bar code's surface and the optical axis of the imager is sufficient to avoid
specular reflections.
51mm
[2.01"]
30mm
Inserts
[1.18"]
14.8mm
[0.58"]
31mm
[1.22"]
73mm
[2.87"]
9.3mm
[0.37"]
12 - 3