External Trigger Parameters; External Trigger Schematic - Honeywell Vuquest 3320g User Manual

External Trigger Parameters

Absolute Maximum
Maximum Input Voltage
Maximum Input Current
Parameter Values
Input Resistance to Ground
Maximum Input Low Voltage Logical Low Level
Input High Voltage Threshold

External Trigger Schematic

6 - 2
The input is protected by an input protection diode on the ground
Low Value: -0.5 Volts side.
High Value: +5.5 Volts The input voltage can be below ground provided it is current limited
below the value shown on the next line of this table.
Input protection diode current. The limiting factor on current is the
Low Value: -6 Milliamperes
dissipation in the 1KΩ, 0402 resistor (not the gate diode limit).
Low Value: 9.7 KΩ
Nominal Value: 10.0 KΩ Pull down resistor loading.
High Value: 10.3 KΩ
High Value: 0.8 Volts Value does not include harness drops or margin for noise.
Low Value: 2.6 Volts Value does not include harness drops or margin for noise.