LOCATION AND FUNCTION OF CONTROLS
See photo [A] on page 3.
@ POWER
switch
Depress to turn on the receiver (= ON).
To turn the receiver off, press it again (m OFF).
© VOL (volume) control
Turn clockwise for more volume. It can be depressed (m) to allow
the SQL (squelch) control to be adjusted more easily.
© Helical antenna (supplied)
Used for air band, PSB and FM reception.
@ ANT (antenna) connector
Connect the supplied helical antenna or the BNC connector of an
optional external antenna for air band, PSB and FM reception.
© SQL (squelch) control
Used for cutting background noise while tuning and during inter-
vals
between
communications.
Normally,
depress
the control
(m AUTO). Press it again to set to ™@ MANUAL,
and adjust the
squelch level manually.
© © (earphone) jack
Connect the supplied earphone for private listening.
This
jack
is also
used
for connecting
an
external
speaker
or
recording broadcast on a tape recorder.
@ AM EXT (external) ANTENNA jack
Connect an optional external antenna for AM reception.
© Band selector
Select the desired band.
© Display (LCD)
Displayed as follows:
The large black dot
eee
ae ency
indicates that the frequency
; ea Ny g
received
is memorized to the @ key.
Ce
=
Pi
'
!
PRIORITY
PROGRAM
J delay function is
activated.
@® Counter keys
Used to input a frequency for direct tuning, to memorize a station
and to receive a memorized station.
@ EXECUTE key
Used for direct tuning.
After pressing the DIRECT key and inputting the desired frequency
with the counter keys, press this key to tune in the frequency.
@® SCAN keys
Used for scan tuning and manual tuning.
When you press the © (plus) or © (minus) key, the frequency is
increased or decreased by the intervals shown on page 13.
If you keep the key pressed, the frequency changes continuously.