Sony AVD-S500ES Operating Instructions Manual

Super audui cd/dvd receiver
Hide thumbs Also See for AVD-S500ES:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Super Audio CD/
DVD RECEIVER
Operating instructions
Mode d'emploi
AVD-S500ES
©2003 Sony Corporation
4-248-074-12(1)
US
FR

Advertisement

Table of Contents
loading

Summary of Contents for Sony AVD-S500ES

  • Page 1 Super Audio CD/ DVD RECEIVER Operating instructions Mode d’emploi AVD-S500ES ©2003 Sony Corporation 4-248-074-12(1)
  • Page 2 The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. AVD-S500ES Serial No.______________...
  • Page 3: Welcome

    30 minutes before operating the unit. Welcome! Thank you for purchasing this Sony Super Audio CD/DVD RECEIVER. Before operating this system, please read this manual thoroughly and retain it for future reference.
  • Page 4: On Cleaning Discs

    If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer. On cleaning discs Do not use a commercially available CD/DVD cleaning disc.
  • Page 5: Table Of Contents

    Table of Contents Welcome! ... 3 Precautions ... 3 About this Manual... 7 This receiver Can Play the Following Discs ... 7 Terms for discs... 7 Notes about Discs ... 9 Guide to the Control Menu Display... 11 Getting Started Unpacking ...
  • Page 6 Additional Information Troubleshooting ... 74 Specifications... 77 Glossary ... 78 Index to Parts and Controls... 81 Language Code List ... 85 DVD Setup Menu List ... 86 Index ... 88...
  • Page 7: About This Manual

    About this Manual • The instructions in this manual describe the controls on the remote. You can also use the controls on the receiver if they have the same or similar names as those on the remote. • The following symbols are used in this manual.
  • Page 8 Title structure Chapter VIDEO CD, Super Track Audio CD, or CD structure Index Album structure Track JPEG Album structure File Note on PBC (Playback Control) (VIDEO CDs) This receiver conforms to Ver. 1.1 and Ver. 2.0 of VIDEO CD standards. You can enjoy two kinds of playback depending on the disc type.
  • Page 9: Notes About Discs

    Do not load the following discs: • A DVD with a different region code (page 8, 79). • A disc that is neither standard nor circular (e.g., card, heart, or star shape). • A disc with paper or stickers on it. •...
  • Page 10 • Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs. This receiver can only play back a standard circular disc. Using neither standard nor circular discs (e.g., card, heart, or star shape) may cause a malfunction.
  • Page 11: Guide To The Control Menu Display

    Guide to the Control Menu Display Use the Control Menu to select a function that you would like to use. The Control Menu display appears when the DVD DISPLAY button is pressed. For details, refer to the page in parentheses. Currently playing title number (Video CD/ Super Audio CD/CD: track number) Disc name or disc...
  • Page 12 ALBUM (JPEG only) (page 29, 35) Selects the album (JPEG) to be played. FILE (JPEG only) (page 29, 35) DATE (JPEG only) (page 41) ANGLE (DVD only) (page 51) PLAYMODE (VIDEO CD/Super Audio CD/CD/MP3/JPEG only) (page 32) REPEAT (page 33) PICTURE MODE (DVD/VIDEO CD/JPEG only) (page 53) CUSTOM PARENTAL CONTROL...
  • Page 13: Getting Started

    Getting Started Unpacking Check that you have the following items: • AM loop antenna (1) • FM wire antenna (1) • S Video cord (1) • Remote Commander (remote) RM-SP500 (1) • R6 (size AA) batteries (2) • Operating instructions (1) Inserting Batteries into the Remote You can control the receiver using the supplied...
  • Page 14: Step 1: Speaker System Hookup

    Step 1: Speaker System Hookup You can enjoy surround sound by connecting 6 speakers (front L/R speakers, center speaker, surround L/R speakers, surround back speaker) and active subwoofer to the receiver. If you do not connect 6 speakers and active subwoofer to the receiver, the receiver offers the means to optimize the signal depending on the number of connected speakers.
  • Page 15: Terminals For Connecting The Speakers

    Terminals for connecting the speakers Connect Front speakers Surround speakers Surround back speaker Center speaker Subwoofer ANTENNA COMPONENT VIDEO OUT (DVD ONLY) COAXIAL COAXIAL IN OPTICAL IN OPTICAL AUDIO AUDIO AUDIO TV/SAT TV/SAT VIDEO2 DIGITAL TV/SAT VIDEO2 VIDEO1 – Front speaker (R) –...
  • Page 16: To Avoid Short-Circuiting The Speakers

    Note for connecting the speaker cords to the receiver Remove about 10 mm ( Connect the stripped ends of the cords to the terminals, taking care to avoid contact between the cords. Make sure the cords are firmly connected to the speaker and receiver terminals. To avoid short-circuiting the speakers Short-circuiting of the speakers may damage the receiver.
  • Page 17: Step 2: Antenna Hookups

    Step 2: Antenna Hookups Connect the supplied AM/FM antennas for listening to the radio. Terminals for connecting the antennas Connect the AM loop antenna FM wire antenna ANTENNA COMPONENT VIDEO OUT (DVD ONLY) COAXIAL COAXIAL IN OPTICAL IN OPTICAL AUDIO AUDIO AUDIO TV/SAT...
  • Page 18 If you have poor FM reception Use a 75-ohms coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below. Outdoor FM antenna Receiver ANTENNA COAXIAL Earth wire (not supplied) To earth Note If you connect the receiver to an outdoor antenna, ground it to protect against lightning. To prevent a gas explosion, do not connect the earth wire to a gas pipe.
  • Page 19: Step 3: Tv And Video Component Hookups

    Step 3: TV and Video Component Hookups Required cords S Video cord for connecting a TV monitor Audio/Video cords (not supplied) When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components. Jacks for connecting video components Connect a To the TV monitor...
  • Page 20 TV with COMPONENT VIDEO IN jacks COMPONENT VIDEO IN ANTENNA COAXIAL COAXIAL IN OPTICAL IN OPTICAL AUDIO TV/SAT TV/SAT VIDEO2 DIGITAL TV/SAT S VIDEO AUDIO Digital satellite receiver If you connect a digital satellite receiver with an OPTICAL OUT jack or a COAXIAL OUT jack The digital satellite receiver can be connected to the TV/SAT (OPTICAL or COAXIAL) INPUT jack instead of the AUDIO IN L/R jacks of the receiver.
  • Page 21: Step 4: Connecting The Ac Power Cord (Mains Lead)

    Step 4: Connecting the AC Power Cord (mains lead) Before connecting the AC power cord (mains lead) of this receiver to a wall outlet (mains), connect the speakers to the receiver (see page 14).
  • Page 22: Speaker Setup

    Speaker Setup For the best possible surround sound, all the speakers other than the subwoofer should be the same distance from the listening position (A). However, this receiver allows you to place the center speaker up to 1.5 metres a) closer (B) and the surround and the surround back speakers up to 4.5 metres b) closer (C, D) to the listening position.
  • Page 23: Playing Discs

    Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operation details supplied with your disc. STANDBY indicator FUNCTION –/+ POWER POWER STANDBY SOUND FIELD A. F. D. MODE DISPLAY TUNER/PRESET FUNCTION...
  • Page 24: Saving Power In Standby Mode

    To turn off the receiver Press "/1 on the remote. The receiver enters standby mode and the STANDBY indicator lights up in red. To turn off the receiver completely, press POWER on the receiver. While playing a disc, do not turn off the receiver by pressing POWER.
  • Page 25: Resuming Playback From The Point Where You Stopped The Disc

    Resuming Playback from the Point Where You Stopped the Disc (Resume Play) When you stop the disc, the receiver remembers the point where you pressed x and “RESUME” appears in the front panel display. As long as you do not remove the disc, Resume Play will work even if the receiver enters standby mode by pressing "/1.
  • Page 26: Using The Dvd's Menu

    Using the DVD’s Menu A DVD is divided into long sections, which make up a picture or music feature. These sections are called “titles.” When you play a DVD which contains several titles, you can select the title you want using TOP MENU/ GUIDE.
  • Page 27: Playing An Mp3 Audio Track

    Notes • Depending on the VIDEO CD, the menu does not appear in Step 1. • Depending on the VIDEO CD, “Press ENTER” in Step 3 may appear as “Press SELECT” in the instructions supplied with the disc. In this case, press To play without using PBC, press ./>...
  • Page 28 Selecting an album and track ALBUM– ENTER C/X/x/c DISPLAY Press DVD DISPLAY. The Control Menu and name of the MP3 data disc appear. Press X/x to select then press ENTER or c. The list of albums contained in the disc appears.
  • Page 29: Playing Jpeg Image Files

    Playing JPEG Image Files You can play JPEG image files on CD-ROMs, CD-Rs, or CD-RWs. However, the discs must be recorded according to ISO9660 level 1, level 2 or Joliet format for the receiver to recognize the files. You can also play discs recorded in Multi Session.
  • Page 30: To Rotate The Current Image

    When the list of all files or albums cannot be displayed on the window, the jump bar appears. Press c to select the jump bar icon, and then scroll the jump bar to display the rest of the list using X/x. Press C or O RETURN/EXIT to return to the file or the album list.
  • Page 31: Creating Your Own Program

    Creating Your Own Program (Program Play) You can play the contents of a disc in the order you want by arranging the order of the tracks on the disc to create your own Program. You can program up to 25 steps. PLAY MODE Number...
  • Page 32: Playing In Random Order

    Press H to start Program Play. Program Play begins. When the program ends, you can restart the same program again by pressing H. Other Operations Do this Return to normal Press CLEAR during playback. play Turn off the In stop mode, press PLAY MODE program menu to turn off the program menu.
  • Page 33: (Shuffle Play) Playing Repeatedly

    Setting the shuffle mode in the Control Menu You can select either normal shuffle or album shuffle (MP3 only). ENTER DISPLAY Press DVD DISPLAY. The Control Menu appears. Press X/x to select MODE), then press ENTER. HOME TOWN 8 ALBUM CONTINUE CONTINUE(ALBUM) SHUFFLE...
  • Page 34: Searching For A Particular Point On A Disc

    x When playing a DVD • OFF: does not play repeatedly. • ALL: repeats all the titles. • TITLE: repeats the current title on a disc. • CHAPTER: repeats the current chapter. x When playing a VIDEO CD/Super Audio CD/CD/MP3, and when Program Play is set to OFF •...
  • Page 35: (Scan, Slow-Motion Play) Searching For A Title/Chapter/Track/Index/Album/File

    To change the scan speed (DVD/ VIDEO CD only) Each time you press m or M during scan, the playback speed changes. Two speeds are available. With each press, the indication changes as follows: Playback direction FF1M t FF2M Opposite direction FR1m t FR2m FF2M/FR2m playback speed is faster than FF1M/FR1m.
  • Page 36: Searching For A Chapter/Index

    x When playing a DVD (TITLE) x When playing a VIDEO CD (TRACK) x When playing a Super Audio CD (TRACK) x When playing a CD (TRACK) x When playing an MP3 (ALBUM) or (TRACK) x When displaying a JPEG file (ALBUM) or Example: when you select (TRACK)
  • Page 37: Viewing Disc Information

    Press ENTER. The receiver starts playback from the selected number. To turn off the Control Menu Press DVD DISPLAY repeatedly until the Control Menu is turned off. To search for a particular point using the time code (TIME SEARCH) Example: If you search for the playing time of the current title on a DVD.
  • Page 38 When playing a DVD Playing time and number of the current title SACD HYBRID ANGLE CD MP3 VIDEO CD PBC NTSC PROGRESSIVE ALL 1DISCS TITLE TRACK CHAPTER INDEX SHUFFLE REPEAT1 PROGRAM MEMORY Remaining time of the current title SACD HYBRID ANGLE CD MP3 VIDEO CD PBC NTSC PROGRESSIVE ALL 1DISCS TITLE...
  • Page 39 When playing an MP3 Playing time and current track number SACD HYBRID ANGLE CD VIDEO CD PBC NTSC PROGRESSIVE ALL 1DISCS TITLE TRACK CHAPTER INDEX H TUNED MONO ST SHUFFLE REPEAT1 PROGRAM MEMORY Remaining time of the current track SACD HYBRID ANGLE CD VIDEO CD PBC NTSC PROGRESSIVE ALL 1DISCS...
  • Page 40: Control Menu

    Checking the Playing Time and Remaining Time in the Control Menu You can check the playing time and remaining time of the current title, chapter, or track, and the total playing time or remaining time of the disc. You can also check the DVD/CD/Super Audio CD text and MP3 folder name/file name/ID3 tag (only song title) recorded on the disc.
  • Page 41: Checking The Date Information (Jpeg Only)

    Checking the date information (JPEG only) You can check the date information during playback when the Exif* tag is recorded in the JPEG image data. DISPLAY Press DVD DISPLAY during playback. The Control Menu appears. MOUNTAIN FAMILY 1 ( 2 0 ) BIRTHDAY 01 / 01 / 2003 Date information * “Exchangeable Image File Format”...
  • Page 42: Sound Adjustments

    Sound Adjustments Changing the Sound If a DVD is recorded with multilingual tracks, you can select the language you want while playing the DVD. If the DVD is recorded in multiple audio formats (PCM, Dolby Digital, MPEG audio, or DTS), you can select the audio format you want while playing the DVD.
  • Page 43: Dvd Only

    To turn off the Control Menu Press DVD DISPLAY repeatedly until the Control Menu is turned off. Notes • For discs not in multiple audio format, you cannot change the sound. • During DVD playback, the sound may change automatically. You can select “AUDIO”...
  • Page 44: Enjoying Surround Sound

    Enjoying Surround Sound You can take advantage of surround sound simply by selecting one of receiver’s pre- programmed sound fields. They bring the exciting and powerful sound of movie theatres into your home. To select sound field, press A.F.D., 2CH, or MODE on the remote repeatedly until the sound field you want appears in the front panel display.
  • Page 45: Selecting A Sound Field

    Selecting a sound field (A.F.D.button) A.F.D. Press A.F.D. on the remote repeatedly until the sound field you want appears in the front panel display. Sound field Display PRO LOGIC PRO LOGIC PRO LOGIC II MOVIE PLII MOVIE PRO LOGIC II MUSIC PLII MUSIC Neo:6 Cinema NEO:6 CIN...
  • Page 46: Mode Button

    In collaboration with Sony Pictures Entertainment, Sony measured the sound environment of their studios and integrated the data of the measurement and Sony’s own DSP (Digital Signal Processor) technology to develop “Digital Cinema Sound.” “Digital Cinema Sound” simulates in a home theatre an ideal movie theatre sound environment based on the preference of the movie director.
  • Page 47 Cinema Studio EX is the integrated mode which operates these elements simultaneously. Notes • The virtual speaker effect may cause increased noise in the playback signal. • When listening with sound fields that employ virtual speakers, you will not be able to hear any sound coming directly from the surround speakers.
  • Page 48: Selecting The Surround Back Decoding Mode

    Selecting the Surround Back Decoding Mode This function lets you select the decoding mode for the surround back signals of the multi channel input stream. By decoding the surround back signal of DVD software, etc., recorded in Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete 6.1 format, etc., you can enjoy the kind of surround sound originally intended for the film (page 78).
  • Page 49: Selecting The Decode Priority

    Notes • You can select the surround back decoding only when A.F.D. mode is selected (page 45). In other sound fields, this function is bypassed internally. • Some discs have no Dolby Digital EX flag, even though their packaging may contain a Dolby Digital Surround EX logo.
  • Page 50: Changing The Speaker Impedance Value

    Changing the Speaker Impedance Value You can change the impedance value in accordance with your speaker’s impedance. The default settings are underlined. ENTER Press AMP MENU. Set the function of the remote to DVD, and then press AMP MENU. Press X/x repeatedly until “SP. IMP. ( )”...
  • Page 51: Using Various Additional Functions

    Using Various Additional Functions Changing the Angles If various angles (multi-angles) for a scene are recorded on a DVD, you can change the viewing angle. For example, while playing a scene of a train in motion, you can display the view from either the front of the train, the left window of the train, or from the right window without having the train’s movement interrupted.
  • Page 52: Displaying Subtitles

    Displaying Subtitles If subtitles are recorded on a disc, you can turn the subtitles on or off while playing. If multilingual subtitles are recorded on the disc, you can change the subtitle language while playing, or turn the subtitles on or off whenever you want.
  • Page 53: Adjusting The Playback Picture

    Adjusting the Playback Picture (PICTURE MODE) You can adjust the video signal of the DVD, VIDEO CD or JPEG from the receiver to obtain the picture quality you want. Choose the setting that best suits the program you are watching. ENTER DISPLAY In stop mode, press DVD DISPLAY.
  • Page 54: (Picture Mode) Locking Discs

    Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) You can set two kinds of playback restrictions for a disc. • Custom Parental Control You can set the playback restrictions so that the receiver will not play inappropriate discs. • Parental Control Playback of some DVDs can be limited according to a predetermined level, such as the age of the viewer.
  • Page 55 Enter your 4-digit password by using the number buttons, then press ENTER. “Custom parental control is set.” appears and the screen returns to the Control Menu display. If you make a mistake entering your password Press C before you press ENTER and input the correct number.
  • Page 56: Parental Control

    Limiting playback for children (Parental Control) (DVD only) Playback of some DVDs can be limited according to a predetermined level, such as the age of the viewer. The “Parental Control” function allows you to set a playback limitation level. A scene that is limited is not played, or it is replaced by a different scene.
  • Page 57 Press X/x to select “STANDARD,” then press ENTER. The selection items for “STANDARD” are displayed. CUSTOM SETUP PARENTAL CONTROL LEVEL: STANDARD: CHANGE PASSWORD OTHERS Press X/x to select a geographic area as the playback limitation level, then press ENTER. The area is selected. If you select “OTHERS t,”...
  • Page 58: Area Code

    Playing the disc for which Parental Control is set Insert the disc and press H. The PARENTAL CONTROL display appears. Enter your 4-digit password using the number buttons, then press ENTER. The receiver starts playback. Notes • If you play a DVD which does not have the Parental Control function, playback cannot be limited on this receiver.
  • Page 59: Other Operations

    • When you replace the batteries of the remote, the code number may reset itself to the default (SONY) setting. Reset the appropriate code number. You can set the code number for your TV or satellite receiver separately.
  • Page 60 Code numbers of controllable satellite receivers If more than one code number is listed, try entering them one at a time until you find the one that works with your satellite receiver. Manufacturer SONY JERROLD/G.I. PANASONIC AV ?/1 S.ATLANTA TV/SAT Controlling the satellite receiver Press TV/SAT.
  • Page 61 Code numbers of controllable Press VIDEO1 or VIDEO2. If more than one code number is listed, try entering them one at a time until you find the one that works with your VCR. Manufacturer Code number SONY 701,702,703,704,705,706 AIWA 710,750,757,758 AKAI 707,708,709,759 BLAUPUNKT...
  • Page 62: Using Other Units

    Using Other Units You can use VCRs or other units connected to the VIDEO1, TV/SAT, or VIDEO2 jacks. Refer to the operation manual supplied with the other unit for further information on its operation. VIDEO1 Press the button “VIDEO1,” “VIDEO2,” or “TV/SAT”...
  • Page 63: Listening To The Radio

    Press ENTER. A preset number appears in the front panel display. The preset number blinks on and off. SACD HYBRID ANGLE CD MP3 VIDEO CD PBC NTSC PROGRESSIVE ALL 1DISCS TITLE TRACK CHAPTER INDEX H TUNED M MONO SHUFFLE REPEAT1 PROGRAM MEMORY Press PRESET + or –...
  • Page 64: Naming Preset Stations

    To listen to non-preset radio stations Use manual or automatic tuning in Step 2. For manual tuning, press TUNING + or – on the remote repeatedly. For automatic tuning, press and hold TUNING + or – on the remote. Tips •...
  • Page 65: Changing The Brightness Of The Front Panel

    Changing the Brightness of the Front Panel There are four levels of brightness for the front panel display. Adjust the brightness according to your room’s lighting conditions. The default setting is “DIMMER OFF.” ENTER Press AMP MENU. Set the function of the remote to DVD, and then press AMP MENU.
  • Page 66: Settings And Adjustments

    Settings and Adjustments Using the Setup Display By using the Setup Display, you can make various adjustments to items, such as picture and sound. You can also set the subtitle language and the Setup Display, among other things. For details on each Setup Display item, see page 67- 73.
  • Page 67: Setting The Display Or Sound Track Language

    To turn off the Setup Display Press DVD SETUP repeatedly until the Setup Display is turned off. * When you select “RESET” following items are returned to the default settings. • Setup Menu (except for the PARENTAL CONTROL) (page 86, 87) After you select “RESET”...
  • Page 68: Settings For The Display

    Settings for the Display (SCREEN SETUP) Choose settings according to the TV to be connected. Select “SCREEN SETUP” in the Setup Display. For details on using the display, see “Using the Setup Display” (page 66). The default settings are underlined. SCREEN SETUP TV TYPE: SCREEN SAVER:...
  • Page 69: (Screen Setup) Custom Settings

    x COMPONENT OUT This will change the type of signal output from the COMPONENT VIDEO OUT jacks on the receiver. See page 79 for more information about the different types. INTERLACE Select this when you are connected to a standard (interlace format) TV.
  • Page 70: Settings For The Speakers

    x AUDIO DRC (AUDIO DYNAMIC RANGE COMPRESSION) Narrows the DYNAMIC range of the sound track. Useful for watching movies at low volume late at night. No compression of DYNAMIC range. STANDARD Reproduces the sound track with the kind of DYNAMIC range that the recording engineer intended.
  • Page 71 SURROUND LARGE (BEHIND, LOW), LARGE (BEHIND, HIGH), LARGE (SIDE, LOW), LARGE (SIDE, HIGH), SMALL (BEHIND, LOW), SMALL (BEHIND, HIGH), SMALL (SIDE, LOW), SMALL (SIDE, HIGH): Specify the size, position, and height to implement the Digital Cinema Surround modes in the sound field (page 46) properly.
  • Page 72 x DISTANCE The default distance setting for the speakers in relation to the listening position is shown below. (10ft) (10ft) (10ft) (10ft) Be sure to change the value in the Setup Display when you move the speakers. FRONT Front speaker distance from the 3 m/10 ft listening position can be set in 0.3 metre (1 ft) increments from 0.9 to 6.9...
  • Page 73: Test Tone

    Adjusting the speaker balance and level by using the test tone Press DVD SETUP in stop mode. The Setup Display appears. Press X or x repeatedly to select “SPEAKER SETUP,” then press ENTER. Press X or x repeatedly to select “TEST TONE,”...
  • Page 74: Additional Information

    If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on.
  • Page 75 The sound loses stereo effect when you play a VIDEO CD, a CD, or an MP3. • Set “AUDIO” to “STEREO” in the Control Menu display (page 42). • Make sure the receiver is connected appropriately. The surround effect is difficult to hear when you are playing a Dolby Digital or MPEG audio sound track.
  • Page 76 (page 51). • The DVD prohibits changing the angles. A disc cannot be ejected and “LOCKED” appears in the front panel display. • Contact your Sony dealer or local authorized Sony service facility. “PROTECT” appears in the front panel display.
  • Page 77: Specifications

    Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.7 % total harmonic distortion from 250 milli watts to rated output.
  • Page 78: Glossary

    Digital Cinema Sound (DCS) This is the generic name of the surround sound produced by digital signal processing technology developed by Sony. Unlike previous surround sound fields mainly directed at the reproduction of music, Digital Cinema Sound is designed specifically for the enjoyment of movies.
  • Page 79 single-layer and double-sided DVD 9.4 GB, and a dual-layer and double-sided DVD 17 GB. The picture data uses the MPEG 2 format, a worldwide standard of digital compression technology. The picture data is compressed to about 1/40 of its original size. DVD also uses variable rate coding technology that processes allocated data according to the status of the picture.
  • Page 80 Super Audio CD A Super Audio CD disc can reproduce sounds that are extremely faithful to the original sound by use of DSD (Direct Stream Digital) technology. This technology utilizes a sampling frequency of 2.8224 MHz, which is 64 times that of a conventional CD, and 1-bit quantization that enables the disc to hold 4 times the amount of information that a standard PCM format CD can...
  • Page 81: Index To Parts And Controls

    Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front Panel POWER STANDBY SOUND FIELD A. F. D. MODE DISPLAY TUNER/PRESET FUNCTION PHONES A Power switch (23) B STANDBY indicator (23) (remote sensor) (13) D 2CH (44) E A.F.D.
  • Page 82: Front Panel Display

    Front Panel Display When playing back a DVD Playing status SACD HYBRID ALL 1DISCS SHUFFLE REPEAT1 PROGRAM MEMORY Current mode When playing back a Super Audio CD, CD, VIDEO CD, or MP3 Current play mode SACD HYBRID ALL 1DISCS SHUFFLE REPEAT1 PROGRAM MEMORY...
  • Page 83 Rear Panel ANTENNA COMPONENT VIDEO OUT (DVD ONLY) COAXIAL COAXIAL IN OPTICAL IN OPTICAL AUDIO AUDIO AUDIO TV/SAT TV/SAT VIDEO2 DIGITAL TV/SAT VIDEO2 VIDEO1 A FM 75 COAXIAL jack (17) B AM terminals (17) C COMPONENT VIDEO OUT jacks (19) D MONITOR (S VIDEO OUT) jack (19) E TV/SAT (S VIDEO IN) jack (19) F VIDEO2 (S VIDEO IN) jack (19)
  • Page 84 Remote Notes • This remote control glows in the dark. However, before glowing, the remote must be exposed to light for a while. • When you operate a DVD player, press DVD 4, and then change the mode of the receiver to DVD. A RM SET UP (59, 60, 61) B TV [/1 (on/standby) (59) C VIDEO1 (61, 62)
  • Page 85: Language Code List

    Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language 1027 Afar 1028 Abkhazian 1032 Afrikaans 1039 Amharic 1044 Arabic 1045 Assamese 1051 Aymara 1052 Azerbaijani 1053 Bashkir 1057 Byelorussian 1059 Bulgarian 1060 Bihari 1061 Bislama 1066...
  • Page 86: Dvd Setup Menu List

    DVD Setup Menu List You can set the following items with the DVD Setup menu. The default settings are underlined. LANGUAGE SETUP (Selects the language you want to use from the displayed language list.) DVD MENU (Selects the language you want to use from the displayed language list.) AUDIO (Selects the language...
  • Page 87 SPEAKER SETUP LARGE SIZE FRONT SMALL LARGE CENTER SMALL NONE SURROUND LARGE (BEHIND, LOW) LARGE (BEHIND, HIGH) LARGE (SIDE, LOW) LARGE (SIDE, HIGH) SMALL (BEHIND, LOW) SMALL (BEHIND, HIGH) SMALL (SIDE, LOW) SMALL (SIDE, HIGH) NONE SURROUND LARGE BACK SMALL NONE SUBWOOFER NONE...
  • Page 88: Index

    Index Numerics 16:9 68 4:3 LETTER BOX 68 4:3 PAN SCAN 68 ALBUM 28, 35 Album 7, 78 ANGLE 51 Antenna Hookups 17 AUDIO 42, 67 AUDIO DRC 70 BACKGROUND 68 BALANCE 72 Batteries 13 CHAPTER 36 Chapter 7, 78 COMPONENT OUT 69 Continuous play CD/VIDEO CD/Super Audio...
  • Page 90 ® STAR d’énergie. ® est une marque , Sony atteste que son en matière d’économie Précautions Sécurité • Si un objet ou du liquide venait à pénétrer à l’intérieur du boîtier, débranchez l’appareil et faites-le vérifier par un personnel qualifié avant de le remettre en marche.
  • Page 91 Félicitations ! Nous vous remercions d’avoir fait l’acquisition de cet ampli-tuner Super Audio CD/DVD de Sony. Avant de le faire fonctionner, lisez attentivement ce mode d’emploi et conservez-le pour toute référence ultérieure. Précautions Sécurité Si un objet ou du liquide venait à pénétrer à l’intérieur du boîtier, débranchez l’ampli-tuner et faites-le vérifier...
  • Page 92 Table des matières Félicitations ! ... 3 Précautions... 3 A propos de ce mode d’emploi ...6 Cet ampli-tuner peut lire les disques suivants ... 6 Terminologie relative aux disques ... 6 Remarques sur les disques ... 9 Utilisation du menu de commande ... 10 Préparation Déballage ...
  • Page 93 Informations complémentaires Dépannage... 78 Spécifications ... 81 Glossaire ... 83 Index des composants et des commandes ...87 Liste des codes de langue... 92 Liste des paramètres du menu de configuration DVD ... 93 Index ... 95...
  • Page 94: A Propos De Ce Mode D'emploi

    A propos de ce mode d’emploi • Les instructions contenues dans le présent mode d’emploi décrivent les commandes de la télécommande. Vous pouvez également utiliser les commandes de l’ampli-tuner si elles portent le même nom ou un nom analogue à celles de la télécommande. •...
  • Page 95 • Scène Sur un CD VIDEO doté de fonctions PBC (page 25), les écrans de menu, les images animées et les images fixes sont divisés en sections appelées « scènes ». • Fichier Il s’agit d’une section d’un CD de données contenant des fichiers image JPEG.
  • Page 96 • Les sections de données sur des CD-Extra • Les DVD-ROM • Les DVD audio • Les DVD-RAM • Les DVD-RW en mode d’enregistrement vidéo (VR) • Les DVD+RW en mode d’enregistrement vidéo (VR) • Les fichiers JPEG progressifs * Il s’agit d’un format logique de fichiers et de dossiers sur les CD-ROM, défini par l’ISO (Organisation internationale de normalisation).
  • Page 97: Remarques Sur Les Disques

    Remarques sur les disques Manipulation des disques • Pour que les disques restent propres, tenez-les par la partie périphérique. Ne touchez jamais la surface. • Ne collez ni papier, ni ruban adhésif sur le disque. • N’exposez pas les disques au rayonnement direct du soleil ou à...
  • Page 98: Utilisation Du Menu De Commande

    Utilisation du menu de commande Utilisez le menu de commande pour sélectionner la fonction souhaitée. Le menu de commande s’affiche lorsque la touche DVD DISPLAY est enfoncée. Pour plus de détails, reportez-vous aux pages indiquées entre parenthèses. Numéro du titre en cours de lecture (CD VIDEO/Super Audio CD/CD : numéro de plage) Numéro du chapitre en cours...
  • Page 99 AUDIO (DVD/CD VIDEO/ Super Audio CD/CD/MP3 uniquement) (page 43) SOUS-TITRE (DVD uniquement) (page 54) ALBUM (JPEG uniquement) (page 28, 36) FICHIER (JPEG uniquement) (page 28, 36) DATE (JPEG uniquement) (page 42) ANGLE (DVD uniquement) (page 53) MODE DE LECTURE (VIDEO CD/Super Audio CD/CD/MP3/JPEG uniquement)(page 32) REPETEE (page 33)
  • Page 100: Préparation

    Préparation Déballage Assurez-vous que vous disposez de l’ensemble des accessoires suivants : • Antenne cadre AM (1) • Fil d’antenne FM (1) • Cordon S vidéo (1) • Télécommande RM-SP500 (1) • Piles R6 (AA) (2) • Mode d’emploi (1) Insertion des piles dans la télécommande Vous pouvez commander l’ampli-tuner au...
  • Page 101: Etape 1 : Raccordement Des Enceintes

    Etape 1 : Raccordement des enceintes Vous pouvez profiter du son ambiophonique en raccordant 6 enceintes (enceintes avant gauche/droite, enceinte centrale, enceintes surround gauche/droite et enceinte surround arrière) ainsi qu’un caisson de graves actif à l’ampli-tuner. Si vous ne raccordez pas 6 enceintes et un caisson de graves actif, l’ampli- tuner vous permet néanmoins d’optimiser le signal en fonction du nombre d’enceintes raccordées.
  • Page 102 Bornes de raccordement des enceintes Raccordez Enceintes avant Enceintes surround Enceinte arrière surround Enceinte centrale Caisson de graves ANTENNA COAXIAL COAXIAL IN OPTICAL IN OPTICAL AUDIO TV/SAT TV/SAT VIDEO2 DIGITAL TV/SAT – Enceinte surround (R) Bornes SPEAKERS FRONT L et R Bornes SPEAKERS SURROUND L et R Borne SPEAKERS SURROUND BACK Borne SPEAKERS CENTER...
  • Page 103 Note sur le raccordement des cordons des enceintes à l’ampli- tuner Dénudez l’extrémité du cordon sur 10 mm ( Raccordez les extrémités dénudées des cordons aux bornes en veillant à éviter tout contact entre les fils. Assurez-vous que les cordons sont fermement raccordés aux bornes des enceintes et de l’ampli-tuner. 10 mm (3/8 po.) Pour éviter un court-circuit des enceintes...
  • Page 104: Etape 2 : Raccordements Des Antennes

    Etape 2 : Raccordements des antennes Raccordez les antennes AM/FM fournies pour écouter la radio. Bornes de raccordement des antennes Raccordez Antenne cadre AM Fil d’antenne FM ANTENNA COAXIAL COAXIAL IN OPTICAL IN OPTICAL AUDIO TV/SAT TV/SAT VIDEO2 DIGITAL TV/SAT Remarques •...
  • Page 105 Si la réception FM est de mauvaise qualité Utilisez un câble coaxial 75 ohms (non fourni) pour raccorder l’ampli-tuner à une antenne FM extérieure comme illustré ci-dessous. Antenne FM extérieure Ampli-tuner ANTENNA COAXIAL Fil de terre (non fourni) Vers la terre Remarque Si vous raccordez l’ampli-tuner à...
  • Page 106: Etape 3 : Raccordements Du Téléviseur Et Des Composants Vidéo

    Etape 3 : Raccordements du téléviseur et des composants vidéo Cordons requis Cordon S vidéo pour le raccordement d’un téléviseur Cordons audio/vidéo (non fournis) Lorsque vous raccordez un cordon, veillez à faire correspondre les broches à codes de couleur aux prises appropriées des composants.
  • Page 107 Téléviseur avec prises COMPONENT VIDEO IN COMPONENT VIDEO IN ANTENNA COMPONENT VIDEO OUT (DVD ONLY) COAXIAL COAXIAL IN OPTICAL IN OPTICAL AUDIO AUDIO AUDIO TV/SAT TV/SAT VIDEO2 DIGITAL TV/SAT VIDEO2 VIDEO1 S VIDEO AUDIO OUTPUT OPTICAL Récepteur satellite numérique Si vous raccordez un récepteur satellite numérique avec prise OPTICAL OUT ou COAXIAL OUT Le récepteur satellite numérique peut être raccordé...
  • Page 108: Etape 4 : Raccordement Du Cordon D'alimentation Secteur

    Etape 4 : Raccordement du cordon d’alimentation secteur Avant de raccorder le cordon d’alimentation secteur de cet ampli-tuner à une prise murale (prise secteur), raccordez les enceintes à l’ampli-tuner (voir page 13).
  • Page 109: Réglage Des Enceintes

    Réglage des enceintes Pour optimiser le son surround, toutes les enceintes, hormis le caisson de graves, doivent être à la même distance de la position d’écoute (A). Cependant, cet appareil vous permet de rapprocher l’enceinte centrale jusqu’à 1,5 mètre a) (B) et les enceintes surround et arrière surround jusqu’à...
  • Page 110: Lecture De Disques

    Lecture de disques Lecture de disques Certaines opérations peuvent être différentes ou limitées selon les DVD ou CD VIDEO. Reportez-vous aux instructions d’utilisation fournies avec votre disque. Témoin STANDBY POWER FUNCTION –/+ POWER STANDBY SOUND FIELD A. F. D. MODE DISPLAY TUNER/PRESET FUNCTION...
  • Page 111 Pour mettre l’ampli-tuner hors tension Appuyez sur la touche "/1 de la télécommande. L’ampli-tuner passe en mode de veille et le témoin STANDBY s’allume en rouge. Pour éteindre complètement l’ampli-tuner, appuyez sur sa touche POWER. Pendant la lecture d’un disque, ne mettez pas l’ampli-tuner hors tension en appuyant sur POWER.
  • Page 112: Reprise De La Lecture À L'endroit Où Vous Avez Arrêté Le Disque

    Reprise de la lecture à l’endroit où vous avez arrêté le disque (Reprise de la lecture) Lorsque vous arrêtez le disque, l’ampli-tuner mémorise l’endroit où vous avez appuyé sur x et l’indication « RESUME » apparaît dans la fenêtre d’affichage du panneau frontal. La fonction de reprise de la lecture continue à...
  • Page 113: Utilisation Du Menu Du Dvd

    Utilisation du menu du Un DVD est divisé en longues sections qui constituent une image ou un morceau de musique. Ces sections sont appelées « titres ». Lorsque vous lisez un DVD contenant plusieurs titres, vous pouvez sélectionner celui de votre choix à...
  • Page 114: Lecture D'une Plage Audio Mp3

    Pour revenir au menu Appuyez sur O RETURN/EXIT. Remarques • Selon le CD VIDEO, le menu n’apparaît pas à l’étape 1. • Selon le CD VIDEO, l’instruction « Appuyez sur ENTER » de l’étape 3 peut être remplacée par « Appuyez sur SELECT » dans les instructions d’utilisation fournies avec le disque.
  • Page 115 Sélection d’un album et d’une plage ALBUM– ENTER C/X/x/c DISPLAY Appuyez sur DVD DISPLAY. Le menu de commande et le nom du disque de données MP3 apparaissent. Appuyez sur X/x pour sélectionner (ALBUM), puis appuyez sur ENTER ou sur c. La liste des albums figurant sur le disque apparaît.
  • Page 116: Lecture Des Fichiers Image Jpeg

    Lecture des fichiers image JPEG Vous pouvez lire des fichiers image JPEG à partir de CD-ROM, CD-R ou CD-RW. Cependant, les disques doivent être enregistrés conformément à la norme ISO9660 niveau 1, niveau 2 ou au format Joliet pour que l’ampli- tuner reconnaisse les fichiers.
  • Page 117 Lorsque la liste de tous les fichiers ou albums ne peut pas être affichée, la barre de défilement apparaît. Appuyez sur c pour sélectionner l’icône de la barre de défilement, puis déplacez-la pour afficher le reste de la liste à l’aide de X/x. Appuyez sur C ou O RETURN/EXIT pour revenir à...
  • Page 118: Création De Votre Propre Programme

    Faites pivoter l’image en cours à l’aide de A chaque pression de c, l’image tourne de 90° dans le sens des aiguilles d’une montre. A chaque pression de C, l’image tourne de 90º dans le sens contraire des aiguilles d’une montre.
  • Page 119 Appuyez sur c. Le curseur se déplace jusqu’à la plage (dans ce cas, « 1 »). Avant de programmer les plages MP3, vous devez sélectionner l’album. Program Total Time 0:00 Track TRACK1 TRACK2 TRACK3 TRACK4 TRACK5 TRACK6 TRACK7 TRACK8 TRACK9 TRACK10 Lorsque la liste de toutes les plages ne peut pas être affichée, la barre de défilement...
  • Page 120: Lecture Dans Un Ordre Aléatoire

    Lecture dans un ordre aléatoire (Lecture aléatoire) L’ampli-tuner peut sélectionner des plages et les lire de façon aléatoire. Des lectures aléatoires successives engendrent un ordre de lecture différent. PLAY MODE En mode d’arrêt, appuyez plusieurs fois sur PLAY MODE jusqu’à ce que l’indication «...
  • Page 121: (Lecture Aléatoire) Lecture Répétée

    Remarque La lecture aléatoire est annulée lorsque vous éjectez le disque. Le mode de lecture change dans l’ordre suivant : ALEATOIRE t LECTURE CONTINUE ALEATOIRE (ALBUM) t LECTURE CONTINUE (ALBUM) Lecture répétée (Lecture répétée) Vous pouvez lire tous les titres/plages/fichiers ou un seul titre/chapitre/plage/album d’un disque.
  • Page 122 x Lors de la lecture d’un DVD • NON : ne lit pas le disque de façon répétée. • TOUS : répète tous les titres. • TITRE : répète le titre en cours sur un disque. • CHAPITRE : répète le chapitre en cours.
  • Page 123: (Lecture Répétée) Recherche D'un Point Spécifique Sur Un Disque

    Recherche d’un point spécifique sur un disque (Balayage, Lecture au ralenti) Vous pouvez localiser rapidement un point spécifique sur le disque en contrôlant l’image ou en effectuant une lecture au ralenti. Remarques • Suivant les DVD/CD VIDEO, il se peut que vous ne puissiez pas réaliser certaines des opérations décrites.
  • Page 124: Recherche D'un Titre/Chapitre/Plage/Index

    Recherche d’un titre/ chapitre/plage/index/ album/fichier Vous pouvez rechercher un titre (DVD), un chapitre (DVD), une plage (CD, CD VIDEO, Super Audio CD, MP3), un index (CD VIDEO, Super Audio CD) et un album (MP3, JPEG) et un fichier (JPEG). Etant donné que les titres, les plages, les albums et les fichiers ont des noms uniques sur le disque, vous pouvez sélectionner celui de votre choix à...
  • Page 125 Appuyez sur X/x pour sélectionner la plage souhaitée, puis appuyez sur ENTER. L’ampli-tuner commence la lecture à partir de la plage sélectionnée. Recherche d’un chapitre/ index Appuyez sur DVD DISPLAY. Le menu de commande apparaît. Appuyez sur X/x pour sélectionner la méthode de recherche.
  • Page 126: Visualisation Des Informations Relatives Au Disque

    Conseil Vous pouvez adapter l’affichage pour qu’il indique le temps de lecture ou la durée restante. Pour plus de détails, reportez-vous à la section « Vérification du temps de lecture et de la durée restante dans le menu de commande » (page 41). Visualisation des informations relatives au disque...
  • Page 127 Lors de la lecture d’un DVD Temps de lecture et numéro du titre en cours SACD HYBRID ANGLE CD MP3 VIDEO CD PBC NTSC PROGRESSIVE ALL 1DISCS TITLE TRACK CHAPTER INDEX TUNED MONO ST SHUFFLE REPEAT1 PROGRAM MEMORY Durée restante du titre en cours SACD HYBRID ANGLE CD MP3 VIDEO CD PBC NTSC PROGRESSIVE...
  • Page 128 Lors de la lecture d’un MP3 Temps de lecture et numéro de la plage en cours SACD HYBRID ANGLE CD VIDEO CD PBC NTSC PROGRESSIVE ALL 1DISCS TITLE TRACK CHAPTER INDEX H TUNED SHUFFLE REPEAT1 PROGRAM MEMORY Durée restante de la plage en cours SACD HYBRID ANGLE CD...
  • Page 129 Vérification du temps de lecture et de la durée restante dans le menu de commande Vous pouvez vérifier le temps de lecture et la durée restante du titre, du chapitre ou de la plage en cours, ainsi que le temps de lecture total ou la durée restante du disque.
  • Page 130 Vérification des informations relatives à la date (JPEG uniquement) Vous pouvez vérifier les informations relatives à la date lorsque l’étiquette Exif* est enregistrée dans les données d’image JPEG. DISPLAY Appuyez sur DVD DISPLAY en cours de lecture. Le menu de commande apparaît. MOUNTAIN FAMILY 1 ( 2 0 ) BIRTHDAY...
  • Page 131: Réglages Du Son

    Réglages du son Commutation du son Si le DVD est enregistré avec des plages multilingues, vous pouvez sélectionner la langue de votre choix en cours de lecture. Si le DVD est enregistré selon plusieurs formats audio (PCM, Dolby Digital, MPEG audio ou DTS), vous pouvez sélectionner le format audio de votre choix en cours de lecture.
  • Page 132 Pour désactiver le menu de commande Appuyez plusieurs fois sur DVD DISPLAY jusqu’à ce que le menu de commande disparaisse. Remarques • Il est impossible de commuter le son des disques qui ne sont pas enregistrés selon plusieurs formats audio. •...
  • Page 133: Utilisation Du Son Ambiophonique

    Utilisation du son ambiophonique Vous pouvez bénéficier du son ambiophonique en sélectionnant simplement l’un des champs acoustiques préprogrammés, en fonction du programme que vous souhaitez écouter. Ils vous permettent de découvrir chez vous l’acoustique exaltante et puissante des salles de cinéma. Pour sélectionner un champ acoustique, appuyez plusieurs fois sur la touche A.F.D., 2CH ou MODE de la télécommande jusqu’à...
  • Page 134 Sélection d’un champ acoustique (touche A.F.D.) A.F.D. Appuyez plusieurs fois sur la touche A.F.D. de la télécommande jusqu’à ce que le champ acoustique souhaité apparaisse dans la fenêtre d’affichage du panneau frontal. Champ acoustique PRO LOGIC PRO LOGIC II MOVIE PRO LOGIC II MUSIC Neo:6 Cinema Neo:6 Music...
  • Page 135 C.ST.EX A (Cinema Studio EX A) Reproduit les caractéristiques sonores du studio de production cinématographique « Cary Grant Theater » de Sony Pictures Entertainment. Il s’agit d’un mode standard parfaitement adapté à la plupart des types de films. x C.ST.EX B (Cinema Studio EX B) Reproduit les caractéristiques sonores du studio...
  • Page 136 • Multidimension virtuelle Crée, à partir d’une seule paire d’enceintes surround, 5 ensembles d’enceintes virtuelles qui entourent l’auditeur. • Concordance avec la profondeur d’écran Dans une salle de cinéma, le son semble venir de l’intérieur de l’image réfléchie sur l’écran. Cet élément recrée cette sensation dans votre séjour en déplaçant le son des enceintes avant «...
  • Page 137: Sélection Du Mode De Décodage Surround Back

    Sélection du mode de décodage Surround Back Cette fonction vous permet de sélectionner le mode de décodage des signaux arrière surround du flux d’entrée multi-canaux. En décodant le signal arrière surround du logiciel DVD, par exemple, enregistré au format Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete 6.1, etc.
  • Page 138: Sélection Du Décodage Prioritaire

    c) Logiciel encodé avec un indicateur qui signale qu’il possède à la fois les signaux Surround EX et 5.1 canaux. d) Logiciel encodé avec les signaux 5.1 canaux et un flux d’extension conçu pour renvoyer ces signaux aux 6.1 canaux discrets. Les signaux 6.1 canaux discrets sont des signaux propres aux DVD qui ne sont pas utilisés dans les cinémas.
  • Page 139: Modification De La Valeur D'impédance Des Enceintes

    En cas de sélection de « AUTO » La méthode de décodage la mieux adaptée est automatiquement sélectionnée parmi les méthodes DTS, Dolby Digital et PCM. Toutefois, aucun son n’est initialement reproduit au moment où commence la lecture de signaux PCM. Conseil Tant que le mode DVD est sélectionné, vous pouvez lire les signaux DTS-CD même si «...
  • Page 140 Impédance des enceintes Pour profiter du meilleur son surround multi- canaux possible, raccordez des enceintes d’une impédance nominale égale ou supérieure à 8 ohms aux bornes FRONT, CENTER, SURROUND et SURROUND BACK, et réglez la valeur sur « SP 8Ω ». Reportez-vous au mode d’emploi joint aux enceintes si vous n’êtes pas sûr de leur impédance.
  • Page 141: Utilisation De Diverses Fonctions Complémentaires

    Utilisation de diverses fonctions complémentaires Commutation des angles Si plusieurs angles d’une scène sont enregistrés sur un DVD, vous pouvez modifier l’angle d’observation. Par exemple, dans une scène de train en marche, vous pouvez afficher la vue observée depuis l’avant du train, de la fenêtre gauche du train ou de la fenêtre droite, sans que le mouvement du train soit interrompu.
  • Page 142: Affichage Des Sous-Titres

    Affichage des sous-titres Si des sous-titres sont enregistrés sur un disque, vous pouvez activer ou désactiver leur affichage à tout moment, en cours de lecture. Si des sous- titres multilingues sont enregistrés sur le disque, vous pouvez commuter la langue des sous-titres en cours de lecture ou activer et désactiver les sous-titres lorsque vous le souhaitez.
  • Page 143: Réglage De L'image Lue

    Réglage de l’image lue (MODE IMAGE) Vous pouvez régler le signal vidéo du DVD, CD VIDEO ou du JPEG provenant de l’ampli-tuner en vue d’obtenir la qualité d’image souhaitée. Sélectionnez le réglage le mieux adapté au programme regardé. ENTER DISPLAY En mode d’arrêt, appuyez sur DVD DISPLAY.
  • Page 144: Verrouillage De Disques

    Verrouillage de disques (VERROUILLAGE PARENTAL PERSONNALISE, CONTROLE PARENTAL) Vous pouvez définir deux sortes de restrictions de lecture pour un disque. • Verrouillage parental personnalisé Vous pouvez fixer des limitations de lecture de sorte que l’ampli-tuner ne lise pas des disques non autorisés.
  • Page 145 x Si vous avez déjà enregistré un mot de passe L’écran de saisie du mot de passe apparaît. Verrouillage parental personnalisé Tapez le mot de passe, puis appuyez sur ENTER Saisissez votre mot de passe à 4 chiffres à l’aide des touches numériques, puis appuyez sur ENTER.
  • Page 146 Lecture limitée pour les enfants (contrôle parental) (DVD uniquement) La lecture de certains DVD peut être limitée suivant un niveau prédéterminé, tel que l’âge des spectateurs. La fonction de « Contrôle parental » vous permet de fixer un niveau de limitation de la lecture.
  • Page 147 Appuyez sur X/x pour sélectionner « STANDARD », puis appuyez sur ENTER. Les paramètres de sélection de « STANDARD » sont affichés. REGLAGE PERSONNALISE CONTROLE PARENTAL NIVEAU: STANDARD: CHANGER MOT DE PASSE AUTRES Appuyez sur X/x pour sélectionner une zone géographique comme niveau de limitation de la lecture, puis appuyez sur ENTER.
  • Page 148 Lecture d’un disque en mode de contrôle parental Insérez le disque et appuyez sur H. L’écran CONTROLE PARENTAL apparaît. Saisissez votre mot de passe à 4 chiffres à l’aide des touches numériques, puis appuyez sur ENTER. L’ampli-tuner commence la lecture. Remarques •...
  • Page 149: Fonctions Complémentaires

    • Lorsque vous remplacez les piles de la télécommande, le numéro de code peut se réinitialiser au réglage par défaut (SONY). Réinitialisez le numéro de code approprié. Conseil Vous pouvez régler séparément le numéro de code de votre téléviseur ou de votre récepteur satellite.
  • Page 150 Si plusieurs numéros de code sont indiqués, testez-les un par un jusqu’à ce que vous trouviez celui qui fonctionne avec votre récepteur satellite. Fabricant SONY JERROLD/G.I. PANASONIC S.ATLANTA Commande du récepteur satellite Appuyez sur TV/SAT. Les sources qui peuvent être pilotées à partir de AV ?/1 la télécommande varient selon le réglage de TV/...
  • Page 151 être commandés Appuyez sur VIDEO1 ou VIDEO2. Si plusieurs numéros de code sont indiqués, testez-les un par un jusqu’à ce que vous trouviez celui qui fonctionne avec votre magnétoscope. Fabricant Numéro de code SONY 701,702,703,704,705,706 AIWA 710,750,757,758 AKAI 707,708,709,759 Fabricant...
  • Page 152: Utilisation D'autres Appareils

    En appuyant sur Vous pouvez Arrêter. AV MENU Afficher le menu. DVD DISPLAY Activer ou désactiver l’affichage. C/X/x/c/ ENTER Sélectionner l’élément du menu ou du guide des programmes. Remarques • Suivant votre magnétoscope, il est possible que vous ne puissiez pas le commander ou utiliser certaines touches ci-dessus.
  • Page 153: Utilisation De La Radio

    Utilisation de la radio Présélection des stations de radio Vous pouvez présélectionner 20 stations pour la bande FM et 10 stations pour la bande AM. Avant de procéder à la syntonisation, veillez à réduire le volume au minimum. PRESET –/+ ENTER X/x Appuyez plusieurs fois sur BAND jusqu’à...
  • Page 154: Ecoute De La Radio

    Pour modifier l’intervalle de syntonisation AM L’intervalle de syntonisation AM peut être réglé sur 9 kHz ou sur 10 kHz (réglage par défaut). Pour changer d’intervalle de syntonisation, éteignez l’ampli-tuner en appuyant sur la touche "/1 de la télécommande. Maintenez enfoncée la touche x (de l’ampli-tuner) et appuyez sur la touche "/1 de l’ampli-tuner pour le mettre sous tension.
  • Page 155 • Pour améliorer la réception, réorientez les antennes fournies. Pour vérifier la fréquence Appuyez plusieurs fois sur DISPLAY/JUMP. A chaque pression sur DISPLAY/JUMP, la fenêtre d’affichage du panneau frontal change de la façon suivante : nom d’index de la station* t fréquence t nom d’index de la station...
  • Page 156: Modification De La Luminosité Du Panneau Frontal

    Modification de la luminosité du panneau frontal Il existe quatre niveaux de réglage de la luminosité de la fenêtre d’affichage du panneau frontal. Réglez la luminosité en fonction des conditions d’éclairage ambiantes. Le réglage par défaut est « DIMMER OFF ». ENTER Appuyez sur AMP MENU.
  • Page 157: Sélections Et Réglages

    Sélections et réglages Utilisation du menu de configuration L’utilisation du menu de configuration vous permet d’effectuer divers réglages de paramètres comme l’image et le son. Vous pouvez également, définir la langue des sous- titres et du menu de configuration, notamment Pour obtenir plus de détails sur chaque paramètre du menu de configuration, reportez- vous à...
  • Page 158: Sélection De La Langue Des Menus Ou De La Bande Son

    Réglage sélectionné REGLAGE DE L'ECRAN TYPE TV: ECONOMISEUR D'ECRAN: ARRIERE-PLAN SORTIE COMPOSANT: Pour désactiver le menu de configuration Appuyez plusieurs fois sur DVD SETUP jusqu’à ce que le menu de configuration soit désactivé. * Lorsque vous sélectionnez « REINITIALISATION » à paramètres suivants retrouvent leur réglage par défaut.
  • Page 159: Réglages De L'écran

    Conseil Si vous sélectionnez « AUTRES t » dans « MENU DVD », « SOUS-TITRE » ou « AUDIO », sélectionnez et entrez le code de langue à partir de la liste en utilisant les touches numériques (page 92). Après avoir effectué une sélection, le code de langue (4 chiffres) s’affiche de nouveau lorsque vous sélectionnez «...
  • Page 160 4:3 LETTER BOX 4:3 PAN SCAN 16:9 Remarque Suivant les DVD, il se peut que « 4:3 LETTER BOX » soit automatiquement sélectionné au lieu de « 4:3 PAN SCAN » et inversement. x ECONOMISEUR D’ECRAN Active et désactive l’économiseur d’écran afin qu’un écran de veille apparaisse lorsque vous laissez l’ampli-tuner en mode de pause ou d’arrêt pendant 15 minutes ou lorsque vous lisez...
  • Page 161: (Reglage De L'ecran) Réglages Personnalisés

    Réglages personnalisés (REGLAGE PERSONNALISE) Permet de régler le contrôle parental et d’autres paramètres. Sélectionnez « REGLAGE PERSONNALISE » dans le menu de configuration. Pour obtenir plus de détails sur l’utilisation du menu de configuration, reportez-vous à la section « Utilisation du menu de configuration » (page 69).
  • Page 162: Réglages Des Enceintes

    Remarques • Lors de la lecture des CD multi-session, l’ampli-tuner détermine la cible à lire comme dernière session ou comme session liée à celle-ci. • Si vous modifiez ce paramètre, réinsérez le disque. x DATE JPEG Modifiez l’ordre des informations relatives à la date d’une image JPEG dans le menu de commande.
  • Page 163 CENTRE GRAND : Sélectionnez ce paramètre par défaut. PETIT : Sélectionnez ce paramètre si vous utilisez une enceinte centrale de petite taille. NEANT : Sélectionnez ce paramètre si vous n’utilisez aucune enceinte centrale. SURROUND GRAND (DERRIERE, BAS), GRAND (DERRIERE, HAUT), GRAND (LATERAL, BAS), GRAND (LATERAL, HAUT), PETIT (DERRIERE, BAS),...
  • Page 164 Schéma des positions Schéma des hauteurs Conseil La position et la hauteur des enceintes surround sont spécialement étudiées pour le mode CINEMA STUDIO EX. x DISTANCE Le réglage de distance par défaut des enceintes par rapport à la position d’écoute est illustré ci- dessous.
  • Page 165 INFRAGRAVE Règle le niveau du caisson de 0 dB graves (–10 dB à +10 dB, pas de 1 dB). x ÉQUILIBRE Vous pouvez faire varier la balance des enceintes gauche et droite de la façon suivante. Veillez à régler « TEST TONALITE » sur «...
  • Page 166: Dépannage

    Si le problème persiste, consultez votre revendeur Sony le plus proche. Alimentation L’ampli-tuner ne se met pas sous tension. • Vérifiez que le cordon d’alimentation secteur est correctement raccordé.
  • Page 167 • Les fiches et les prises sont sales. Essuyez-les avec un chiffon légèrement imbibé d’alcool. • Sélectionnez « DEC. PRI. » sous AMP MENU et choisissez « AUTO » lors de la lecture de signaux DTS-CD à partir d’un appareil externe raccordé à la prise DIGITAL IN (OPTICAL IN/COAXIAL IN) (page 50).
  • Page 168 • Les données ne sont pas formatées au format MP3 bien qu’elles en aient l’extension (« .MP3 »). • L’ampli-tuner peut uniquement lire des fichiers audio MP3 (MPEG1 Audio Layer3). • Retirez le disque et sélectionnez « REGLAGE PERSONNALISE » parmi les paramètres de configuration.
  • Page 169: Spécifications

    Impossible d’éjecter un disque et « LOCKED » apparaît dans la fenêtre d’affichage du panneau frontal. • Contactez votre revendeur Sony ou un centre de service après-vente Sony agréé. « PROTECT » apparaît dans la fenêtre d’affichage du panneau frontal.
  • Page 170 Lecteur Super Audio CD/DVD Laser Système de format des signaux Partie tuner FM Système Gamme de syntonisation Antenne Bornes d’antenne Fréquence intermédiaire Partie tuner AM Système Gamme de syntonisation 530 – 1 710 kHz (avec Antenne Fréquence intermédiaire Partie vidéo Entrées Sorties Caractéristiques générales...
  • Page 171: Glossaire

    Digital Cinema Sound (DCS) Ce nom générique couvre le son surround produit par la technologie de traitement des signaux numériques développée par Sony. Contrairement aux champs acoustiques surround antérieurs qui étaient principalement axés sur la reproduction de la musique, Digital Cinema Sound est spécialement conçu pour la...
  • Page 172 Dolby Pro Logic II La technologie Dolby Pro Logic II crée cinq canaux de sortie à large bande passante à partir de sources limitées à deux canaux. Ceci est réalisé à l’aide d’un décodeur ambiophonique à matrice haute-fidélité qui extrait les propriétés spatiales de l’enregistrement original sans l’ajout de colorations sonores.
  • Page 173 Format entrelacé (balayage entrelacé) Le format entrelacé constitue la méthode standard NTSC d’affichage des images TV au rythme de 30 images par seconde. Chaque image est balayée deux fois : entre les lignes de balayage paires et les lignes de balayage impaires, au rythme de 60 balayages par seconde.
  • Page 174 • Super Audio CD + CD (disque hybride) Ce disque est constitué d’une couche HD et d’une couche CD. En outre, comme les deux couches sont sur une même face, vous ne devez pas retourner le disque pendant la lecture. Vous pouvez lire cette touche CD à l’aide d’un lecteur de CD conventionnel.
  • Page 175: Index Des Composants Et Des Commandes

    Index des composants et des commandes Pour plus de détails, reportez-vous aux pages indiquées entre parenthèses. Panneau frontal POWER STANDBY SOUND FIELD A. F. D. MODE DISPLAY TUNER/PRESET FUNCTION PHONES A Interrupteur Marche/Arrêt (22) B Témoin STANDBY (veille) (22) (Capteur de télécommande) (12) D 2CH (45) E A.F.D.
  • Page 176 Fenêtre d’affichage du panneau frontal Pendant la lecture d’un DVD Statut de lecture SACD HYBRID ALL 1DISCS SHUFFLE REPEAT1 PROGRAM MEMORY Numéro du titre en Mode en cours cours Lors de la lecture d’un Super Audio CD, CD, CD VIDEO ou MP3 Mode de lecture en cours SACD HYBRID ALL 1DISCS...
  • Page 177 Panneau arrière ANTENNA COMPONENT VIDEO OUT (DVD ONLY) COAXIAL COAXIAL IN OPTICAL IN OPTICAL AUDIO AUDIO AUDIO TV/SAT TV/SAT VIDEO2 DIGITAL TV/SAT VIDEO2 VIDEO1 A Prise FM 75Ω COAXIAL (16) B Bornes AM (16) C Prises COMPONENT VIDEO OUT (Sortie vidéo composante) (18) D Prise MONITOR (S VIDEO OUT) (Moniteur (Sortie S vidéo)) (18) E Prise TV/SAT (S VIDEO IN) (TV/Satellite...
  • Page 178 Télécommande Remarques • Cette télécommande est phosphorescente dans l’obscurité pour autant qu’elle ait été préalablement exposée à la lumière pendant un certain temps. • Lorsque vous utilisez un lecteur de DVD, appuyez sur DVD 4, puis modifiez le mode de l’amplituner en sélectionnant DVD.
  • Page 179 eh O RETURN/EXIT (Retour/Quitter) (25, 27, 28, 30, 36, 58, 69) ej TV/VIDEO (61) ek MUTING (Sourdine) (23) el AMP MENU (Menu amplification) (46, 49, 50, 51, 65, 67, 68) r; DVD SETUP (Configuration DVD) (58,...
  • Page 180: Liste Des Codes De Langue

    Liste des codes de langue L’orthographe des langues est conforme à la norme ISO 639 : 1988 (E/F). Code Langue 1027 Afar 1028 Abkhazian 1032 Afrikaans 1039 Amharic 1044 Arabic 1045 Assamese 1051 Aymara 1052 Azerbaijani 1053 Bashkir 1057 Byelorussian 1059 Bulgarian 1060...
  • Page 181: Liste Des Paramètres Du Menu De Configuration Dvd

    Liste des paramètres du menu de configuration DVD Vous pouvez régler les paramètres suivants avec le menu de configuration DVD. Les réglages par défaut sont soulignés. CHOIX DE LA LANGUE ECRANS (Sélectionnez la langue de votre choix à partir de la liste des langues affichées.) MENU DVD (Sélectionnez la langue de...
  • Page 182 REGLAGE H-P TAILLE AVANT CENTRE SURROUND SURROUND ARRIERE INFRAGRAVE DISTANCE AVANT CENTRE SURROUND SURROUND ARRIERE NIVEAU CENTRE SURROUND GAUCHE SURROUND DROIT SURROUND ARRIERE INFRAGRAVE ÉQUILIBRE AVANT TEST TONALITE REINITIALISATION GRAND PETIT GRAND PETIT NEANT GRAND (DERRIERE, BAS) GRAND (DERRIERE, HAUT) GRAND (LATERAL, BAS) GRAND (LATERAL, HAUT) PETIT (DERRIERE, BAS)
  • Page 183: Index

    Index Chiffres 16:9 71 4:3 LETTER BOX 71 4:3 PAN SCAN 71 ALBUM 27, 36 Album 6, 83 ALEATOIRE 32 ANGLE 53 ARRIERE-PLAN 72 AUDIO 43, 70 Avance rapide 35 Balayage 35 CD VIDEO 83 Champ acoustique 45 CHAPITRE 37 Chapitre 6, 83 CHOIX DE LA LANGUE 70 Code local 7, 83...
  • Page 184 Sony Corporation Printed in Malaysia...

Table of Contents