Table of Contents
Advertisement
[ FM/AMIAIRIPSB reception |
MANUAL TUNING
Use manual tuning when you do not know the frequency of the sta-
tion you want to tune in, or when you want to tune in a station more
precisely after scan tuning.
The numbers in the illustration refer to the sequence of operations.
1
Depress the POWER switch (= ON).
2
Set the band selector to the desired band.
3
Set the SQL control to MIN.
4
@ Keep the SCAN @ or © key pressed until the desired station
is received.
For higher frequencies
For lower frequencies
Pp
SCAN
@ Press the SCAN
key momentarily to tune the station pre-
cisely.
Each
time the key is pressed,
the frequency
is in-
creased or decreased by the intervals shown on page 13.
5
Adjust the volume with the VOL control.
After listening, set the POWER switch to m OFF.
16
Advertisement
Table of Contents
