Delay Functlon: <Svicdeccevccccceccdeasessanaesttevecdacc Tees. Gvofendeedes Cade; External Antenna Connection ..........Ceceeeceeee Cet Ceecee Ene Eeteeeneeaee; Recording A Broadcast; Ce Eeeeeeeee En Eneeeeeneeneneneeeenes - Sony AIR-7 Operating Instructions Manual

[ AIR/PSB reception |
DELAY FUNCTION
Using the delay function, the station being received will be kept
tuned in during memory scanning after the signal stops for approx.
2 seconds, i.e. during the interval between communications. The
delay function is activated on all counter keys at the factory.
To cancel the delay function
While pressing the DELAY key, press the counter key on which the
delay function is to be cancelled.
(20
= & oS? (2Oo)
coeee- dots @) °
Disappears.
The corresponding small dot in the display disappears.
To activate the delay function again
While pressing the DELAY key, press the counter key on which you
want the delay function to activate. The small dot in the display ap-
pears.
@ The delay function can be activated and cancelled while another
station is being received.
@ Using the delay and priority functions simultaneously, you can
receive a station continuously.
EXTERNAL ANTENNA CONNECTION
See illustration [1] on page 5.
In a steel-frame building, mountainous areas or at a long distance
from the transmitter, reception may be unsatisfactory with the
helical antenna or the built-in ferrite bar antenna. In this case, con-
nect a commercially available external antenna to the ANT connec:
tor or the AM EXT ANTENNA jack.
To detach the helical antenna, while pressing down the connector
on the antenna, turn the antenna counterclockwise, then pull it out.
See illustration on page 5.
Notes
@ The use of a suitable lightning arrestor is recommended if the
antenna extends out-of-doors.
@ Locate an outdoor antenna as far away from the street as possi-
ble.
For further details, see the instruction manual for the antenna.
RECORDING A BROADCAST
See illustration [K] on page 5.
1 Tune in the desired station and adjust the volume to normal
listening level.
2 Connect the © jack on the receiver to the microphone input jack
on a recorder using the optional RK-64A connecting cord.
3 Set the recorder in recording mode.
The sound to be recorded cannot be heard from the speaker.
22