Table of Contents
Advertisement
APRS MESSAGE FUNCTIONS
Receiving a Message
Each time a proper message is received, the frequency
display is interrupted to show information as below:
①
②
① Meaning indicator ② Callsign (Sender) ③ Message
Key Name
[ ] [MODE]
To return to the frequency display.
[
]
To move to the detail screen.
[A/B]
To move to the message screen.
Message addressed to you
B
Bulletin message
!
Report by the National Weather Service
A message for which a reception acknowledgment was
returned
G
Group message
• When a duplicate message from the same station is
received, the reception interrupt display does not appear
and an error tone sounds. When the frequency at that time
appears on the display, "dM" (duplicate Message) and the
calling station's Callsign appears on the display.
Entering a Message
1 Press [MSG].
The message list appears on the display.
Key Name
[ENC]
To select a list number.
[ ]
To return to the frequency display.
[
]
To move to the detail screen.
[A/B]
To delete the message on the cursor.
2 Select a list number by [ENC] control and press [
The message list menu appears on the display.
③
Operation
Meaning
Operation
① TX Message status ② Meaning indicator ③ Receiving
message/sending message ④ Callsign ⑤ Message
⑥ Receive date ⑦ Line number ⑧ Message group
⑨ Receive time
• The display shows up to 67 characters of the message.
• The following indicators appear depending on the types
of received messages.
"n" indicates the remaining number of times for
n
transmitting the message
A message for which a reception acknowledgment was
returned
A message transmitted 5 times (For a message, a
.
reception acknowledgment was not returned
Message addressed to you
B
Bulletin message
!
Report by the National Weather Service
G
Group message
Received message
A message for transmitting
].
14-9
First page:
① ② ③ ④
⑤
Last page:
⑥
⑦
⑧
a TX Message status
b Meaning
c RX or TX
⑨
Advertisement
Table of Contents
