Table of Contents
Advertisement
23 VOICE GUIDANCE
Voice guidance is a function that provides audio information
about operating conditions such as the frequency displayed
on the display, memory channels, and function settings.
SETTING VOICE GUIDANCE MODE
1 Access Menu No. 916.
2 Select [Off], [Manual], [Auto1], or [Auto2].
[Off]: Turn off the voice guidance function.
[Manual]: Reads out the current status when pressing [ ].
[Auto1]: Reads out the status or displayed information
changed by the operation.
[Auto2]: It reads out the changed status and display
contents as you operate. When reading out a memory
channel, if a memory name is registered, the memory
name (only characters that can be spoken) will be read out
instead of the frequency.
Note:
¡ The voice guidance language is English only. This is in
accordance with the display contents when menu No. 990 is set
to "English".
¡ In order to make it easier to hear, the displayed content and the
readout content may be different in some parts.
[PF2]
Power ON
¡ If you press
+
OFF, the transceiver power turns ON and the voice guidance is
set to [Auto1].
¡ If you want to listen to the reading again using [Auto 1] or [Auto
2], press [ ] briefly to read out the current status.
¡ While the voice guidance is being read out, the reception sound
is not output.
Voice Guidance Volume
This function is to set the volume level of the voice guidance.
The volume level can be changed by VOL Link (Linked with
[VOL] control.), or set by a value among "Level 1" to "Level 7".
A larger value results in a greater volume. The default is [VOL
Link].
1 Access Menu No. 917.
2 Select [VOL Link] or [Level 1] - [Level 7].].
3 Press [A/B].
The volume level set.
when the transceiver power is
Voice Guidance Speed
Set the voice guidance reading out speed. The default is
[Speed 1].
1 Access Menu No. 918.
2 Set the guidance speed level from 1 to 4.
The speed level set.
Speecd 1: Normal speed
Speecd 2: 1.15 times normal speed
Speecd 3: 1.30 times normal speed
Speecd 4: 1.45 times normal speed
The higher the number, the faster the speed.
Callsign Readout method
Specifies how to pronounce the alphabetic characters (A-Z) in
the callsign.
1 Access Menu No. 919.
2 Select [Standard], [Full Phonetics], or [Suffix Phonetics].
[Standard]:
Read out the alphabet as it is.
[Phonetics (Full)]:
All are read out in phonetic code.
[Phonetics (Suffix ):
Only the suffix is read out in phonetic code.
APRS Voice
This function reads out the sender's callsign and content when
receiving an APRS message addressed to your station.
1 Access Menu No. 575.
2 Select [Off] or [On].
[Off]:
Turn OFF the APRS Voice function.
[On]:
Turns ON the APRS Voice function.
Note:
¡ The APRS Voice (menu No. 575) operates regardless of the
Voice Guidance mode setting (menu No. 916).
23-1
Advertisement
Table of Contents
